Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Usage:
Digital Diagnostic Tools Need To Be Reworked To Be Used With The 3600 Family Of Spark Ignited Engines
Show/hide table
| SMCS - | 0781 | PI7290 |
August 13, 1992
U-116
A-87
AU-77
B-44
E-72
O-92
TM-12
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
November 30, 1992Problem
Some 7X1400 and 8C9904 Digital Diagnostic Tools may cause engine shutdown when inserted into the data link of the 3600 family of Spark Ignited Engines.
Action Required
Return 7X1400 or 8C9904 Digital Diagnostic Tools purchased prior to June 1, 1992 to have them reworked to prevent this problem.
Service Claim Allowances
Not applicable. These digital diagnostic tools will be reworked at no charge.
Parts Disposition
Return affected 7X1400 and 8C9904 Digital Diagnostic Tools to the address below. Place a tag on the tool with a reference to this Service Letter and the name and phone number of a person at your dealership that may be contacted concerning this rework.
330 SW Adams St., LD180
Peoria, IL 61602
Attn: Tool Repair
Caterpillar Information System:
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain Batches Of Cat Engine Oil Need To Be Removed From Stock Certain Batches Of Cat Engine Oil Need To Be Removed From Stock
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
Product Support Program For Installing A Turbocharger Wastegate Opening Pressure Shim On Certain 3306C Truck Engines Product Support Program For Installing A Turbocharger Wastegate Opening Pressure Shim On Certain 3306C Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
Product Support Program For Replacing The Turbocharger Turbine Housing On Certain 3306C Truck Engines Product Support Program For Replacing The Turbocharger Turbine Housing On Certain 3306C Truck Engines
Product Support Program For Repairing Valve Failures On Certain 3606, 3608, 3612, And 3616 Engines Equipped With Remanufactured Cylinder Head(s) Product Support Program For Repairing Valve Failures On Certain 3606, 3608, 3612, And 3616 Engines Equipped With Remanufactured Cylinder Head(s)
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor
PARTS STOCK ACTION ONLY - CERTAIN REMANUFACTURED CRANKSHAFTS AND SHORT BLOCKS FOR 1160 AND 3208 ENGINES AND CERTAIN REM ANUFACTURED 1160 AND 3208 ENGINES NEED TO BE REMOVED FROM PARTS STOCK - PI7295 - MAILED US AND CANADA, CACO, COFA, BRAZIL , CFEL, PARTS STOCK ACTION ONLY - CERTAIN REMANUFACTURED CRANKSHAFTS AND SHORT BLOCKS FOR 1160 AND 3208 ENGINES AND CERTAIN REM ANUFACTURED 1160 AND 3208 ENGINES NEED TO BE REMOVED FROM PARTS STOCK - PI7295 - MAILED US AND CANADA, CACO, COFA, BRAZIL , CFEL,
Product Support Program For Replacing The Aluminum Flywheel Housing Gasket On Certain 3408 Marine Engines Product Support Program For Replacing The Aluminum Flywheel Housing Gasket On Certain 3408 Marine Engines
Product Support Program For Replacing The Fuel Line Groups On Certain D6H And D7H Tractors; 14G And 140G Motor Graders; Challenger 65 Tractors; 235C Excavators; 615C And 627E Tractors; 637E Scrapers; 815B And 816B Compactors, 966E And 966F Loaders; A Product Support Program For Replacing The Fuel Line Groups On Certain D6H And D7H Tractors; 14G And 140G Motor Graders; Challenger 65 Tractors; 235C Excavators; 615C And 627E Tractors; 637E Scrapers; 815B And 816B Compactors, 966E And 966F Loaders; A
All 4P7135 Sleeves Need To Be Removed From Parts Stock All 4P7135 Sleeves Need To Be Removed From Parts Stock
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing An Intake Manifold Heater On Certain 3306C Truck Engines Product Support Program For Installing An Intake Manifold Heater On Certain 3306C Truck Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Support Program For Fuel Injectors On Certain Challenger 75 Tractors And 3176 Truck Engines Product Support Program For Fuel Injectors On Certain Challenger 75 Tractors And 3176 Truck Engines