Housing (Front) - Remove
Start By:
- Remove the engine oil pan.
- Remove the gear group (front).
- Remove the fuel injection pump.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) that secure bypass tube (2) to front housing (3). Remove bypass tube (2) from the cylinder head. Remove O-ring (4) and gasket (5) from bypass tube (2).
Show/hide table
Illustration 2 g06327294 - Remove bolts (7), bolts (8), and bolts (9) from front housing (3).
Note: The bolts are three different lengths. Note the positions of the different bolts.
- Remove front housing (3) from the cylinder block.
- Remove gasket (6).
Show/hide table
Illustration 3 g06327303 - If necessary, remove thrust washer (10) from the cylinder block.
Show/hide table
| |
| Illustration 1 | g06327292 |
Caterpillar Information System:
C7.1 (Mechanical) Engines for Caterpillar Built Machines Idler Gear - Install
Procedure for Installing a Beacon Relay on Certain 320, 323, 330, and 336 Excavators {1408, 1431, 7301} Procedure for Installing a Beacon Relay on Certain 320, 323, 330, and 336 Excavators {1408, 1431, 7301}
340 Excavator Maintenance Interval Schedule
Track Shoe Ice Lug Requirements {4170} Track Shoe Ice Lug Requirements {4170}
The Steering Lines Group is Improved on Certain 797 Off-Highway Trucks {4304} The Steering Lines Group is Improved on Certain 797 Off-Highway Trucks {4304}
340 Excavator Engine Valve Lash - Check
340 Excavator System Pressure Release
340 Excavator Declaration of Conformity
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Product Storage
C7.1 (Mechanical) Engines for Caterpillar Built Machines Fuel Injection Pump - Install
Well Stimulation Pumps Walk-Around Inspection
C7.1 (Mechanical) Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Housing (Front) - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
320D3 and 323D3 Excavators Machine Electronic Control System System Schematic
C7.1 (Mechanical) Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C9.3 Industrial Engine Product Description
320D3 and 323D3 Excavators Machine Electronic Control System System Schematic
320D3 and 323D3 Excavators Machine Electronic Control System General Information
320D3 and 323D3 Excavators Machine Electronic Control System Engine Speed Control - Test
320D3 and 323D3 Excavators Machine Electronic Control System Relay - Test
C7.1 (Mechanical) Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Alternator - Remove and Install
C9.3 Industrial Engine ARD Spark Plug - Clean - Emission Related Component