New Engine Software is Now Used on Certain C9 Industrial Engines {1920}
- Industrial Engine
- C9 INDUSTRIAL (S/N: REH7097-10943)
Description Of Change: The Engine Rate Shape (ERS) has been updated in the new engine software to run low idle at lower ERS for improved stability.
Adaptable To: The following changes are adaptable to the engines within the listed serial numbers and are effective with all engines after the listed serial numbers.
The new and former part numbers are listed in Table 1.
Show/hide table
| Required Parts | ||
| New Part Number | Part Name | Former Part Number(1) |
| Engine Software | ||
Show/hide table
| (1) | The former part number listed is for reference only and may differ. |
Caterpillar Information System:
The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054} The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054}
Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410} Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410}
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Assemble
323D3 Hydraulic Excavators Engine Supplements Turbocharger - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Valve Mechanism Cover - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Cylinder - Disassemble
320D3 Excavators Boom/Stick/Bucket Combinations
323D3 Hydraulic Excavators Engine Supplements Crankshaft Front Seal - Remove and Install
320D3 and 323D3 Excavators Systems Main Hydraulic System
323D3 Hydraulic Excavators Engine Supplements Water Pump - Remove and Install
320D3 and 323D3 Excavators Systems Relief Valve (Main)
320D3 Excavators Leaving the Machine
320D3 Excavators Securing the Machine
320D3 Excavators Lifting and Tying Down the Machine
New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920} New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Restricted Visibility
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490} New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490}
320D3 and 323D3 Excavators Systems Relief Valve (Swing)
320D3 and 323D3 Excavators Systems Oil Makeup (Swing System)
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Assemble