Fuel Injection Pump
Show/hide table
Illustration 1 | g03130476 |
Show/hide table
Specification for 493-9679 Fuel Injection Pump Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 143-9392 Stud | Use the following procedure in order to tightening the studs and the bolts as shown in the Illustration 1: |
2 | 4 | 5P-8347 Bolt | 1. Tighten to |
2. Again, turn to reach the final turn angle of 30 ± 1 degrees. | |||
3. Final tightening torque should be |
|||
3 | 1 | 9S-8004 O-Ring Plug | Torque to |
4 | 1 | 9S-8005 O-Ring Plug | Torque to |
5 | 1 | 9S-8003 Plug | Torque to |
6 | 1 | 143-9392 Stud | Torque to |
7 | 2 | 6V-5135 Socket Setscrew | Torque to |
8 | 1 | 9S-4180 Plug | Torque to |
9 | 1 | 104-6385 Stud | Torque to |
10 | 2 | 6V-3940 Bolt | Torque to |
11 | 1 | 294-3031 Special Bolt | Torque to |
12 | 3 | 8C-8545 Bolt | Torque to |
13 | 1 | 6V-5845 Bolt | Before assembly, apply red Loctite 271 to the threads. |
1. Tighten to |
|||
2. Again tighten to |
|||
3. Turn to reach the final turn angle of 31 ± 2 degrees. | |||
4. And final tightening torque should be |
Caterpillar Information System:
Energy Storage System Cell Additive - Replenish
XQ570 Rental Generator Set Product Description
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Major)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (In-Frame)
C9.3 Tier 4 Final Engines Cylinder Head Valves
C1.7 and C2.2 Industrial Engine Intake Manifold Air Temperature Is High
New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R} New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Air Cleaner Service Indicator - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Turbocharger - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Top End)
C175-20 Locomotive Engine Fuel Rail Pressure - Release
A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205} A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205}
C9.3 Tier 4 Final Engines Cylinder Head
C175-20 Locomotive Engine Dosing Control System Operation
Well Stimulation Pumps General Hazard Information
New Engine Software and Fuel Injectors Are Available For Certain C175 Commercial Engines {1290, 1920} New Engine Software and Fuel Injectors Are Available For Certain C175 Commercial Engines {1290, 1920}
C175 Tier 4 Final Engines for Off-Highway Trucks SCR Warning System Problem
Well Stimulation Pumps System Pressure Release
XQ570 Rental Generator Set Plate Locations and Film Locations
C18 Generator Set Engines Combustion Head - Remove and Install
New Software Is Used on Certain G3516C Generator Set Engines {1920, 7490, 7610, 7620} New Software Is Used on Certain G3516C Generator Set Engines {1920, 7490, 7610, 7620}
Technical Analysis 1 (TA1) Visual Inspection for Gas Engine Generator Sets {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Gas Engine Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000} Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}