A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205} Caterpillar


A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205}

Usage:

3512C DPB
Marine Auxillary Engine
3512C (S/N: MXN1-UP; MXP1-UP; TTW1-UP)
Marine Engine
3512C (S/N: DPB1-UP; DPC1-UP; PXC1-UP; PXF1-UP; PXG1-UP; PXW1-UP; TTX1-UP)

Description Of Change: The new damper is 533.4 mm (21 inch) in diameter.

The damper change was driven to utilize a common damper between the 3512 IMO II engines and the 3512 Tier IV engines.

The 3512 IMO II 1200 rpm engines must continue to use the 584.2 mm (23 inch) damper.

Adaptable To: The new 450-0259 Damper Gp replaces both the former 375-7425 Damper Gp and the former 380-1830 Damper Gp.

The new damper is adaptable to the above engines back to first production.

This change is effective for the serial numbers listed in Table 1.

Table 1
Effective Serial Numbers 
S/N:DPB00200-UP 
S/N:DPC00200-UP 
S/N:MXN00202-UP 
S/N:MXP00212 
S/N:MXP00214-UP 
S/N:PXC00225-UP 
S/N:PXF00241-UP 
S/N:PXG00220-UP 
S/N:PXW00227-UP 
S/N:TTW00200-UP 
S/N:TTX00200-UP 

Caterpillar Information System:

G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Operation
New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920} New Software Is Used on Certain 3500 Tier 3 Marine Engines {1920}
HPU300 Hydraulic Power Pack Before Operation
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Refill Capacities
G3512 EPA Emergency and Non-Emergency Standby Generator Sets General Hazard Information
G3512 Generator Set Safety Messages
A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393} A New Thermostat Housing Bracket Is Used on Certain 3500 Marine Engines {1380, 1393}
HPU300 Hydraulic Power Pack Operation
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Product Storage
C18 Generator Set Engines Ignition Coil - Remove and Install
C1.7 and C2.2 Industrial Engine Component Location
New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}
C175-20 Locomotive Engine Fuel Rail Pressure - Release
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Top End)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Turbocharger - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Air Cleaner Service Indicator - Inspect
New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R} New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R}
C1.7 and C2.2 Industrial Engine Intake Manifold Air Temperature Is High
C9.3 Tier 4 Final Engines Cylinder Head Valves
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (In-Frame)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Major)
XQ570 Rental Generator Set Product Description
Energy Storage System Cell Additive - Replenish
C9.3 Tier 4 Final Engines Fuel Injection Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.