Refill Capacities
The capacity of the engine crankcase includes the capacity of the oil filters that are installed at the factory.
Show/hide table
Lubrication System
Approximate Refill Capacities |
||
---|---|---|
Engine | Liters | US Gallons |
G3508 | 231 | 61 |
G3512 | 338 | 89 |
G3516 | 423 | 112 |
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity equals the capacity of the Jacket Water Circuit plus the Aftercooler Circuit plus the External System capacity. The external system capacity includes the following components: expansion tank, heat exchanger, radiator, and piping. Refer to the specifications that are provided by Caterpillar or by the OEM of the equipment. Record the Total Cooling System capacity in the following Table:
Show/hide table
Cooling System
Approximate Refill Capacities |
|||
System | G3508 | G3512 | G3516 |
Jacket Water Circuit | 114 L
30 US gal |
148 L
39 US gal |
205 L
53 US gal |
Aftercooler Circuit | 13 L
3.5 US gal |
15 L
4 US gal |
16.5 L
4.5 US gal |
External System | |||
Total Cooling System |
Caterpillar Information System:
G3500 Engines Manual Stop Procedure
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 05
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 04
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 03
G3500 Engines Starting the Engine
G3500 Engines Cold Weather Starting
G3500 Engines Configuration Parameters
A New Crankshaft Is Available For Certain C4.4 Engines {1202} A New Crankshaft Is Available For Certain C4.4 Engines {1202}
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Engines {108H} A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Engines {108H}
HPU300 Hydraulic Power Pack Hydraulic System Oil Level - Check
Certain C9 Industrial Engines Can Over Speed After Start Up {1920} Certain C9 Industrial Engines Can Over Speed After Start Up {1920}
G3500 Engines Fluid Recommendations
Crankshaft Pre-Assembly Instructions for Well Stimulation Pumps {1202} Crankshaft Pre-Assembly Instructions for Well Stimulation Pumps {1202}
A New Instruction to Change the Configuration Settings Of Generator Reverse Reactive Power is Now Available On Certain Generator Sets {4490} A New Instruction to Change the Configuration Settings Of Generator Reverse Reactive Power is Now Available On Certain Generator Sets {4490}
G3500 Engines Belts - Inspect/Adjust/Replace
G3500 Engines Compressor Bypass - Check
C7.1 Commercial Marine Engine Water Temperature Regulator - Test
C7.1 Commercial Marine Engine Position the Valve Mechanism Before Maintenance Procedures
C9.3 Tier 4 Final Engines Fuel Lines
349F and 352F Excavators Machine System Specifications Suspension Seat
C9.3 Tier 4 Final Engines Air Lines
C9.3 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines