A New Wiring Harness Is Used on Certain G3500 Engines {1403}
- Gas Engine
- G3508B (S/N: RBK1-UP)
- G3512B (S/N: JHH1-UP)
- G3516B (S/N: JEF1-UP)
- G3512B (S/N: JHH1-UP)
- Industrial Engine
- G3520B (S/N: GLF1-UP; GET1-UP)
- Petroleum Engine
- G3520B PETROLEUM (S/N: TPC1-UP)
Description Of Change: The new harness assembly increased the value of the inline resistor from 4.7 ohms to approximately 6.2 ohms.
Adaptable To: The new 489-9449 Wiring Harness replaces the former 450-3897 Wiring Harness.
The new solenoid valve gp is adaptable to the above engines back to first production.
This change is effective for the serial numbers listed in Table 1.
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:RBK01486-UP |
| S/N:JHH01039-UP |
| S/N:JEF03015-UP |
| S/N:GET00115-UP |
| S/N:GLF01108-UP |
| S/N:TPC01148-UP |
Caterpillar Information System:
3500 Industrial and Generator Set Engines Fluid Recommendations
2015/09/23 A New Head Gasket Is Used On Certain Truck Engines {1100}
3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Turbine Temperature Is High
C1.7 and C2.2 Industrial Engines Engine Operation
EMCP4.2B Utility Circuit Breaker Status Warning
C1.7 and C2.2 Industrial Engines After Starting Engine
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Return) - Replace
323F SA and 323F LN Excavator Hydraulic System Oil Level - Check
C1.7 and C2.2 Industrial Engines High Pressure Fuel Lines
C280-12 Marine Engine Engine Oil - Change
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Pilot) - Replace
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Case Drain) - Replace
G3606 and G3608 Engines Engine Lifting Bracket - Remove and Install
A New Fuel Cap With Relief Vent Is Now Used on Certain XQ800 Power Modules {1273} A New Fuel Cap With Relief Vent Is Now Used on Certain XQ800 Power Modules {1273}
2015/09/11 New Software Is Used on Certain G3300 Petroleum Engines {1920}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434} An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
New Machining and Assembly Procedures Are Used on Certain C18 Marine Engines Equipped with Engine Mounted Heat Exchanger {1379} New Machining and Assembly Procedures Are Used on Certain C18 Marine Engines Equipped with Engine Mounted Heat Exchanger {1379}
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Fluid End - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Valve - Remove and Install - Grooveless Valve Retainers
C1.7 and C2.2 Industrial Engine General Information
EMCP4.2B Utility Circuit Breaker Status Circuit Fault
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Valve - Remove and Install - Grooved Valve Retainers
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Plunger - Remove and Install
EMCP4.2B Utility to Generator Transfer Failure Warning