A New Head Gasket Is Used On Certain Truck Engines {1100}
- Remanufactured Truck Engines
- 3406E (S/N: 4AS1-UP)
- C-15 (S/N: C2A1-UP)
- Truck Engine
- 3406E (S/N: 1MM1-UP; 2WS1-UP; 1LW1-UP)
- 3406E ATAAC EUI DI (S/N: 5EK1-UP; 6TS1-UP)
- C-15 (S/N: MBN1-UP; 6NZ1-UP; 9NZ1-UP)
- C-16 (S/N: 7CZ1-UP)
- C15 (S/N: SDP1-UP; BXS1-UP; MXS1-UP; NXS1-UP)
- C16 (S/N: G1D1-UP)
- 3406E ATAAC EUI DI (S/N: 5EK1-UP; 6TS1-UP)
Description Of Change: A new head gasket has been released to incorporate the best features from both previous heads and allows all engines to be serviced with a single gasket.
Adaptable To: The new 359-0908 Cylinder Head Gasket replaces both 224-5122 Gasket and 153-9653 Cylinder Head Gasket. The new Cylinder Head Gasket is adaptable back to first production on the serial numbers listed above.
The new Head Gasket is listed below in Table 1 along with the parts that are being replaced.
Show/hide table
Old Parts | New Parts |
153-9653 | 359-0908 |
224-5122 |
Caterpillar Information System:
3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Turbine Temperature Is High
C1.7 and C2.2 Industrial Engines Engine Operation
EMCP4.2B Utility Circuit Breaker Status Warning
C1.7 and C2.2 Industrial Engines After Starting Engine
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Return) - Replace
323F SA and 323F LN Excavator Hydraulic System Oil Level - Check
C1.7 and C2.2 Industrial Engines High Pressure Fuel Lines
C280-12 Marine Engine Engine Oil - Change
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Pilot) - Replace
323F SA and 323F LN Excavator Hydraulic System Oil Filter (Case Drain) - Replace
C1.7 and C2.2 Industrial Engines Belts - Inspect/Adjust
323F SA and 323F LN Excavator Engine Oil and Filter - Change
3500 Industrial and Generator Set Engines Fluid Recommendations
A New Wiring Harness Is Used on Certain G3500 Engines {1403} A New Wiring Harness Is Used on Certain G3500 Engines {1403}
G3606 and G3608 Engines Engine Lifting Bracket - Remove and Install
A New Fuel Cap With Relief Vent Is Now Used on Certain XQ800 Power Modules {1273} A New Fuel Cap With Relief Vent Is Now Used on Certain XQ800 Power Modules {1273}
2015/09/11 New Software Is Used on Certain G3300 Petroleum Engines {1920}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434} An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
New Machining and Assembly Procedures Are Used on Certain C18 Marine Engines Equipped with Engine Mounted Heat Exchanger {1379} New Machining and Assembly Procedures Are Used on Certain C18 Marine Engines Equipped with Engine Mounted Heat Exchanger {1379}
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Fluid End - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Valve - Remove and Install - Grooveless Valve Retainers
C1.7 and C2.2 Industrial Engine General Information
EMCP4.2B Utility Circuit Breaker Status Circuit Fault
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Valve - Remove and Install - Grooved Valve Retainers