Oil Line (Supercharger) - Remove and Install
Removal Procedure
- Remove clamp (2), bolt (3), and bolts (4) .
Note: Cleanliness is an important factor. Before the installation procedure, clean the exterior of the component.
Show/hide table
Illustration 1 | g03867810 |
- Remove oil line assembly (1)
Installation Procedure
- Install oil line assembly (1) in the reverse order of removal.
Note: Tighten bolts (4) to a torque of 25 ± 2 N·m (221 ± 18 lb in).
Note: Tighten bolt (3) to a torque of 25 ± 2 N·m (221 ± 18 lb in).
Caterpillar Information System:
3516E Generator Sets Generator Bearing - Replace
3516E Generator Set Refill Capacities
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
C27 and C32 Industrial Engines Walk-Around Inspection
340F and 352F Excavators Long Reach Front Operational Checks
G3606 and G3608 Engines Prechamber Check Valve - Remove and Install
C27 and C32 Industrial Engines Overhaul (Major)
C280 Marine Engines Prelubrication Pump Problem
C280 Marine Engines Aftertreatment Identification Module - Test
G3606 and G3608 Engines Camshaft Speed Sensor - Remove and Install
C18 Generator Set Maintenance Interval Schedule - Standard
G3606 and G3608 Engines Piston Cooling Jets - Remove and Install
C7.1 Marine Engine System Overview
C7.1 Marine Engine Indicator Lamps
C18 Marine Generator Set Maintenance Interval Schedule
2015/08/18 Improved Routing is Now Used for the Seat Suspension Harness in TLV2 Seat Suspensions on Certain Machines {1408, 7312, 7324}
G3606 and G3608 Engines Gas Pressure Regulator - Remove and Install
HPU300 Hydraulic Power Pack Plate Locations and Film Locations
2015/09/25 A New Heat Shield Is Available for Certain 3512C Locomotive Engines {1067}
3500 Generator Sets with Dynamic Gas Blending Plate Locations and Film Locations
C7.1 Commercial Marine Engine System Configuration Parameters
2015/07/31 New Software Is Used on Certain 3516C Commercial Engines {1920}
C7.1 Commercial Marine Engine Acceleration Is Poor or Throttle Response Is Poor