Prechamber Check Valve - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | - | Dow Corning 111 固定胶 | 1 |
开始:
- 拆下阀室盖。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将螺塞 (1) 和密封件从机体组件 (2) 上拆下。
- 拆下预燃室单向阀 (3) 和密封垫。 从预燃室单向阀上卸下 O 形密封圈。
Show/hide table
| |
| 图 1 | g00591121 |
Show/hide table
| |
| 图 2 | g00591123 |
注: 继续拆解步骤前，请清除螺塞 (1) 顶部的机油。
- 按与拆卸相反的顺序安装预燃室单向阀 (3)。
- 在 O 形密封圈的外侧涂敷一薄层工具 (A)。
- 将预燃室单向阀 (3) 拧紧至扭矩为
115 ± 15 N·m (85 ± 11 lb ft) 。 - 拧紧螺塞 (1) 至扭矩
15 N·m (132 lb in) 。
Caterpillar Information System:
C27 and C32 Industrial Engines Overhaul (Major)
C280 Marine Engines Prelubrication Pump Problem
C280 Marine Engines Aftertreatment Identification Module - Test
G3606 and G3608 Engines Camshaft Speed Sensor - Remove and Install
C18 Generator Set Maintenance Interval Schedule - Standard
C18 Generator Set Maintenance Interval Schedule - Standby Generator Sets
C280 Marine Engines Speed Control - Test
G3606 and G3608 Engines Detonation Sensor - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
C27 and C32 Industrial Engines Belts - Inspect/Adjust/Replace
PM3516 Power Modules Maintenance Interval Schedule - Prime Power
PM3516 Power Modules Maintenance Interval Schedule - Standby
340F and 352F Excavators Long Reach Front Operational Checks
C27 and C32 Industrial Engines Walk-Around Inspection
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
3516E Generator Set Refill Capacities
3516E Generator Sets Generator Bearing - Replace
C8.7 Marine Engine Oil Line (Supercharger) - Remove and Install
G3606 and G3608 Engines Piston Cooling Jets - Remove and Install
C7.1 Marine Engine System Overview
C7.1 Marine Engine Indicator Lamps
C18 Marine Generator Set Maintenance Interval Schedule
2015/08/18 Improved Routing is Now Used for the Seat Suspension Harness in TLV2 Seat Suspensions on Certain Machines {1408, 7312, 7324}