Air Inlet Choke - Assemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | - | Bostik - Never Seez 镍防咬合剂 | - |
- 使用密封的润滑剂润滑唇形密封 (8) 的密封唇。
- 安装唇形密封 (8)、蝶形板 (9)、螺栓 (7) 和轴 (10)。 松动拧紧螺栓 (7)。
Show/hide table
图 2 g03797426 - 安装板 (6) 和板 (5)。
Show/hide table
图 3 g03797417 - 将工具 (A) 涂抹到螺栓 (4) 的螺纹上。
- 安装止推垫圈 (3) 和螺栓 (4)。 拧紧螺栓 (4) 至扭矩为
47 ± 9 N·m (35 ± 7 lb ft) 。Show/hide table图 4 g03797520 - 将工具 (A) 涂抹到螺栓 (1) 的螺纹上。
- 安装盖 (2) 和螺栓 (1)。 拧紧螺栓 (1) 至扭矩为
47 ± 9 N·m (35 ± 7 lb ft) 。 - 完全关闭蝶形板 (9) 并将螺栓 (7) 拧紧至扭矩
12 ± 3 N·m (106 ± 27 lb in) 。
Show/hide table
图 1 | g03797436 |
Caterpillar Information System:
C9.3 Marine Auxiliary and Generator Set Engine Configuration Parameters
C9.3 Marine Auxiliary and Generator Set Engine Electrical Connectors
C7.1 Engines Service Tool Features
C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
3516C Marine Engines Crankshaft Main Bearings - Remove and Install
C7.1 Marine Generator Set Fluid Recommendations
C9.3 Marine Engines Fuel Injector
G3612 and G3616 Engines Air Inlet Choke - Disassemble
G3500H 60Hz Generator Sets Product Description
C9.3 Marine Engines Air Starting Motor
C7.1 Engines Valve Position - Test
C18 Generator Set Safety Messages
C9.3 Marine Auxiliary and Generator Set Engine Acceleration Is Poor or Throttle Response Is Poor
3516C Marine Engines Pistons and Connecting Rods - Remove and Install
2015/05/01 New Fuel Lines Groups Are Used on Certain C18 Marine Engines with SCAC {1274}
2015/06/05 New Fuel Injectors Are Used On Certain Tier 4 C9.3 Machine Engines {1254, 1290}
3516C Marine Engines Cylinder Liner - Remove and Install
C2.2 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C18 Generator Set Additional Messages
C7.1 Engines Service Tool Error Identifiers
C4.4 and C7.1 Engines Customer Passwords
C4.4 and C7.1 Engines Factory Passwords
C4.4 and C7.1 Engines Electronic Service Tool Does Not Communicate
G3600 A4 Engines Coolant Pressure Is High