Air Inlet Choke - Disassemble
- 拆下螺栓 (1) 和盖 (2)。
Show/hide table
图 2 g03797417 - 卸下螺栓 (4) 和止推垫圈 (3)。
Show/hide table
图 3 g03797426 - 拆下板 (5) 和板 (6)。
Show/hide table
图 1 | g03797407 |
- 拆下唇形密封 (8)、螺栓 (7)、轴 (10) 和蝶形板 (9)。
Show/hide table
图 4 | g03797436 |
Caterpillar Information System:
G3500H 60Hz Generator Sets Product Description
C9.3 Marine Engines Air Starting Motor
C7.1 Engines Valve Position - Test
C18 Generator Set Safety Messages
C9.3 Marine Auxiliary and Generator Set Engine System Overview
C8.7 and C12.9 Marine Engines Sensor Signal (Analog, Passive) - Test
794 AC Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
G3612 and G3616 Engines Air Inlet Choke - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Electronic Service Tools
C8.7 and C12.9 Marine Engines Electrical Power Supply - Test
C9.3 Marine Auxiliary and Generator Set Engine Welding Precaution
C9.3 Marine Auxiliary and Generator Set Engine General Information
C9.3 Marine Engines Fuel Injector
C7.1 Marine Generator Set Fluid Recommendations
3516C Marine Engines Crankshaft Main Bearings - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
C7.1 Engines Service Tool Features
C9.3 Marine Auxiliary and Generator Set Engine Electrical Connectors
C9.3 Marine Auxiliary and Generator Set Engine Configuration Parameters
G3612 and G3616 Engines Air Inlet Choke - Assemble
C9.3 Marine Auxiliary and Generator Set Engine Acceleration Is Poor or Throttle Response Is Poor
3516C Marine Engines Pistons and Connecting Rods - Remove and Install
2015/05/01 New Fuel Lines Groups Are Used on Certain C18 Marine Engines with SCAC {1274}
2015/06/05 New Fuel Injectors Are Used On Certain Tier 4 C9.3 Machine Engines {1254, 1290}