Fuel Injection Timing - Check
Show/hide table
图 1 | g03797680 |
典型示例 (X) 喷油泵齿轮正时标记 (Y) 凸轮轴齿轮正时标记 |
- 拆下螺栓 (4),然后拆下垫圈 (3)。 拆下板 (2),然后拆下 O 形密封圈 (1)。
- 旋转曲轴,直到正时标记对准。 曲轴最多可旋转两整圈。 如果正时标记未对准,喷油泵齿轮或者凸轮轴齿轮安装不当。 请参阅拆解和组装以了解更多信息。
Caterpillar Information System:
3516C Marine Engines Cylinder Liner - Remove and Install
2015/06/05 New Fuel Injectors Are Used On Certain Tier 4 C9.3 Machine Engines {1254, 1290}
2015/05/01 New Fuel Lines Groups Are Used on Certain C18 Marine Engines with SCAC {1274}
3516C Marine Engines Pistons and Connecting Rods - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Acceleration Is Poor or Throttle Response Is Poor
G3612 and G3616 Engines Air Inlet Choke - Assemble
C9.3 Marine Auxiliary and Generator Set Engine Configuration Parameters
C9.3 Marine Auxiliary and Generator Set Engine Electrical Connectors
C7.1 Engines Service Tool Features
C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
3516C Marine Engines Crankshaft Main Bearings - Remove and Install
C7.1 Marine Generator Set Fluid Recommendations
C18 Generator Set Additional Messages
C7.1 Engines Service Tool Error Identifiers
C4.4 and C7.1 Engines Customer Passwords
C4.4 and C7.1 Engines Factory Passwords
C4.4 and C7.1 Engines Electronic Service Tool Does Not Communicate
G3600 A4 Engines Coolant Pressure Is High
C18 Generator Set Sound Information
C4.4 Generator Sets Maintenance Interval Schedule - Prime Power
C4.4 Generator Sets Maintenance Interval Schedule - Standby
C4.4 and C7.1 Engines ECM Will Not Accept Factory Passwords
C4.4 Generator Sets Product Installation
C4.4 Generator Sets Coolant Temperature Regulator - Replace