Fuel Injector
Show/hide table
Illustration 1 | g03797412 |
Show/hide table
Specification for 460-8213 Fuel Injector Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | Use the following procedure in order to install the fuel injector group: |
1. Lubricate seals (4) with clean engine oil. Lubricate the injector bore with clean engine oil. | |||
2. Place the injector into the bore. The pin (3) of the injector fits into the groove of the cylinder head. | |||
3. Place the fuel injector clamp (2) with the label "C9" in the UP position. | |||
4. When the injector hits the bottom of the bore, torque the bolt (1) to standard torque. | |||
5. Lubricate the bore and the nut of the quill assembly with clean engine oil. Also, lubricate the threads in the cylinder head with clean engine oil. | |||
6. Insert the quill assembly (5) completely into the cylinder head. Ensure that the ball (7) of the quill assembly is in line with the slot of the cylinder head. | |||
6 | 1 | 278-5519 Nut | Torque to |
Caterpillar Information System:
G3612 and G3616 Engines Air Inlet Choke - Disassemble
G3500H 60Hz Generator Sets Product Description
C9.3 Marine Engines Air Starting Motor
C7.1 Engines Valve Position - Test
C18 Generator Set Safety Messages
C9.3 Marine Auxiliary and Generator Set Engine System Overview
C8.7 and C12.9 Marine Engines Sensor Signal (Analog, Passive) - Test
794 AC Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
G3612 and G3616 Engines Air Inlet Choke - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Electronic Service Tools
C8.7 and C12.9 Marine Engines Electrical Power Supply - Test
C9.3 Marine Auxiliary and Generator Set Engine Welding Precaution
C7.1 Marine Generator Set Fluid Recommendations
3516C Marine Engines Crankshaft Main Bearings - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
C7.1 Engines Service Tool Features
C9.3 Marine Auxiliary and Generator Set Engine Electrical Connectors
C9.3 Marine Auxiliary and Generator Set Engine Configuration Parameters
G3612 and G3616 Engines Air Inlet Choke - Assemble
C9.3 Marine Auxiliary and Generator Set Engine Acceleration Is Poor or Throttle Response Is Poor
3516C Marine Engines Pistons and Connecting Rods - Remove and Install
2015/05/01 New Fuel Lines Groups Are Used on Certain C18 Marine Engines with SCAC {1274}
2015/06/05 New Fuel Injectors Are Used On Certain Tier 4 C9.3 Machine Engines {1254, 1290}
3516C Marine Engines Cylinder Liner - Remove and Install