New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C13 Engines {1408, 1900}
- Engine:
- C13 (S/N: KWJ1-UP)
- Industrial Engine:
- C9.3 (S/N: C9N1-UP; D9N1-UP)
Description of Change: The cable straps now being used are made from plastic to prevent cutting through the wire of the certain aftertreatment temperature sensors.
Adaptable To: The 7K-1181 Cable Straps replaces the previous 290-1993 Cable Straps that were used.
This change is adaptable back to first production of the serial numbers that are listed above. Table 1 lists the effective machine serial numbers for this change.
Show/hide table
| Effective Engine Serial Numbers |
|---|
| S/N:KWJ04405-UP |
| S/N:C9N01545-UP |
| S/N:D9N05437-UP |
Caterpillar Information System:
2014/10/09 New Harness Components Now being Used on Filter Bypass Warning Harness on Certain TH55-E70-3512CP, TH55 FT-E70, and TH55 FT-E90 Transmissions {1408, 1435, 3067}
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070} Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
320 GC, 320 and 323 Excavator Machine Systems Specifications Excavator Pins (Boom and Boom Cylinder)
458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
C3.4B Engines Sensor Signal (Analog, Passive) - Test
2015/02/26 An Improved Yoke Assembly is Used in the Transmission Arrangement on Certain 773 and 775 Off-Highway Trucks {3030, 3159}
458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
320D and 323D Excavators Machine System Specifications Swing Drive
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Handrail
C3.4B Engines Sensor Signal (Analog, Active) - Test - Exhaust Gas Pressure Sensor
C3.4B Industrial Engine Maintenance Interval Schedule
2015/03/25 Service Tool Connector Pin Out Update For Certain 3512C Engines {1408, 7553}
Selective Catalytic Reduction Retrofit Aftertreatment Electrical Power Supply - Test
2015/07/10 Cat® Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
2014/10/10 Cat® Reman Now Offers Additional Long Blocks for Certain Engines {1000, 1201}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lighting
320D3 and 323D3 Excavators Machine System Specifications Hood
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Front Lines
C7 and C9 Industrial Engines Sensor Signal (Analog, Active) - Test
Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052} Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Auxiliary Hydraulic Lines
C3.4B Engines Solenoid Valve - Test
794 AC Off-Highway Truck Machine Systems Electric Retarder - Remove and Install