Swing Drive
Show/hide table
| |
| Illustration 1 | g06186727 |
Show/hide table
| Specification for 378-9517 Swing Drive Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 16 | 8T-0348 Bolt | Torque to |
| 2 | - | - | Apply 4C-5599 Anti-Seize Compound to the inside diameter, outside diameter of the roller bearing and to the surfaces of the mating parts. |
| 3 | 1 | 6V-7238 Shutoff Valve | Torque to |
| When the valve shutting off, tighten to |
|||
| B | - | - | After installation, make the stake marks near the opening of each spring pin hole. |
| Distance from the edge of the spring pin hole to the stake mark is |
|||
| 4 | 2 | 199-4561 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Lubricate the circumference of lip type seals with grease when the seal is installed in the cage. |
| 5 | 6 | 453-3447 Bolt | Torque to |
Caterpillar Information System:
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Handrail
C3.4B Engines Sensor Signal (Analog, Active) - Test - Exhaust Gas Pressure Sensor
C3.4B Industrial Engine Maintenance Interval Schedule
C3.4B Engines Sensor Signal (Analog, Active) - Test
C3.4B Industrial Engine Engine Rating Conditions
C3.4B Industrial Engine Engine Rating Definitions
C175-16 PETROLEUM ENGINES Engine Oil Screen - Remove and Install
794 AC Off-Highway Truck Power Train Inverter Cabinet - Remove and Instal
C7 and C9 Industrial Engines Sensor Supply - Test
C7 and C9 Industrial Engines Power Take-Off - Test
2015/08/14 Cat® Reman Announces the Availability of Type 2 Cylinder Packs and Connecting Rods for Certain C175 Engines {1218, 1239}
794 AC Off-Highway Truck Machine Systems Rear Suspension (Cylinder) - Remove and Install
458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-9975 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
2015/02/26 An Improved Yoke Assembly is Used in the Transmission Arrangement on Certain 773 and 775 Off-Highway Trucks {3030, 3159}
C3.4B Engines Sensor Signal (Analog, Passive) - Test
458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
320 GC, 320 and 323 Excavator Machine Systems Specifications Excavator Pins (Boom and Boom Cylinder)
458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070} Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
2014/10/09 New Harness Components Now being Used on Filter Bypass Warning Harness on Certain TH55-E70-3512CP, TH55 FT-E70, and TH55 FT-E90 Transmissions {1408, 1435, 3067}
2015/02/20 New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C13 Engines {1408, 1900}
2015/03/25 Service Tool Connector Pin Out Update For Certain 3512C Engines {1408, 7553}
Selective Catalytic Reduction Retrofit Aftertreatment Electrical Power Supply - Test
2015/07/10 Cat® Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}