Hood
Show/hide table
| |
| Illustration 1 | g03732612 |
|
Typical example | |
Show/hide table
| Specification for 457-7369 Hood and Guard Gp and 519-0940 Hood and Guard Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 4 | 8T-6693 Screw | Torque to |
| 2 | - | - | Apply Loctite Spray Adhesive to the seal edge side for the rust proofing. |
Show/hide table
| |
| Illustration 2 | g03732613 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 3 | 2 | 8T-4137 Bolt | Torque to |
| 4 | Use the following shims for adjustment of two strikers (6) and the door lock to provide an overlap dimension of |
||
| 4 | 087-3908 Shim | Thickness is |
|
| 4 | 087-3909 Shim | Thickness is |
|
| 5 | 6 | 105-3487 Bolt | Torque to |
Caterpillar Information System:
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lighting
2014/10/10 Cat® Reman Now Offers Additional Long Blocks for Certain Engines {1000, 1201}
2015/07/10 Cat® Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
Selective Catalytic Reduction Retrofit Aftertreatment Electrical Power Supply - Test
2015/03/25 Service Tool Connector Pin Out Update For Certain 3512C Engines {1408, 7553}
2015/02/20 New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C13 Engines {1408, 1900}
2014/10/09 New Harness Components Now being Used on Filter Bypass Warning Harness on Certain TH55-E70-3512CP, TH55 FT-E70, and TH55 FT-E90 Transmissions {1408, 1435, 3067}
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070} Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-6550 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
320 GC, 320 and 323 Excavator Machine Systems Specifications Excavator Pins (Boom and Boom Cylinder)
458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7815 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
C3.4B Engines Sensor Signal (Analog, Passive) - Test
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Front Lines
C7 and C9 Industrial Engines Sensor Signal (Analog, Active) - Test
Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052} Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Auxiliary Hydraulic Lines
C3.4B Engines Solenoid Valve - Test
794 AC Off-Highway Truck Machine Systems Electric Retarder - Remove and Install
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Grease Lines
Selective Catalytic Reduction Retrofit Aftertreatment Sensor (Data Link Type) - Test
C7 and C9 Industrial Engines Sensor Signal (Analog, Passive) - Test
323F SA and 323F LN Excavator Safety Messages
C175-16 PETROLEUM ENGINES Engine Oil Pan - Remove
C7 and C9 Industrial Engines Speed/Timing - Test