C7.1 Marine Engine Caterpillar


Inlet Manifold Temperature Sensor

Usage:

C7.1 JME



Illustration 1g03726536

(1) Tighten the sensor to the following torque. ... 20 N·m (15 lb ft)

Caterpillar Information System:

C7.1 Industrial Engine DEF Filler Screen - Clean
2014/09/26 New Pressure Sensor Group Is Now Used On Certain Cat® Engines with EMCP 4.x Controls {1924, 4490}
XQ2000 Power Module Maintenance Interval Schedule
Broken Bolt Survey for all 3500 Engines{1100, 7553} Broken Bolt Survey for all 3500 Engines{1100, 7553}
F Series Excavator Monitoring System WinFlash Menu
2014/09/26 New Improved Advisor Software Is Used on Certain 3600 Engines {1920}
F Series Excavator Monitoring System Device Test Menu
F Series Excavator Monitoring System Calibration Menu
F Series Excavator Monitoring System Override Parameters Menu
F Series Excavator Monitoring System Tool Programming Menu
F Series Excavator Monitoring System Configuration Menu
F Series Excavator Monitoring System Status Menu
2015/02/02 Improved Pressure Sensor Gp Is Now Used on Certain Cat® Products {1439}
C3.4B Engines DEF Pump Pressure Sensor - Test
XQ125 Generator Set DEF Filler Screen - Clean
TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Remove and Install
C4.4 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Lines - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Remove and Install
AP500F Asphalt Paver DEF Manifold Filters - Replace
C3.4B Engines Idle Validation - Test
C4.4 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.