F Series Excavator Monitoring System Caterpillar


Tool Programming Menu

Usage:

352F-VG A9J
用户可以使用机具编程设定菜单更改所选机具的设定。


图 1g03575976



图 2g03379927

(1) 小键盘制导区

(2) 后退按钮

(3) "确定"按钮

(4) 向左键

(5) 向上键

(6) 向下键

(7) 向右键

  1. 从维修菜单选择机具编程设定可进入机具编程设定菜单。

    注: 进入维修模式需要用到密码。 请参阅系统操作, "维修模式"以了解进入 Service(维修)菜单的说明。

  1. 按向上键 (5) 或向下键 (6) ,直到突出显示机具编程设定。 按 "OK(确定)"按钮 (3) 。

  1. 按向上键或向下键,直到选中所需机具。 然后按 "OK(确定)"按钮。

    注: 也可以使用右侧控制键盘上的软键来选择作业机具。




    图 3g03575979

    机具编程设定项的典型屏幕。

  1. 按向上键或向下键突出显示要更改的参数。 然后按 "OK(确定)"按钮。 此参数将突出显示。 请参阅图 3。

  1. 按向上键或向下键更改数值。 按 "OK(确定)"按钮设定数值。

    注: 指示的项目因型号而异。

  1. 按返回按钮 (2) ,返回前一菜单。

Caterpillar Information System:

F Series Excavator Monitoring System Configuration Menu
F Series Excavator Monitoring System Status Menu
F Series Excavator Monitoring System Diagnostic Menu
F Series Excavator Monitoring System ECM Summary Menu
F Series Excavator Monitoring System Service Menu
F Series Excavator Monitoring System Reverse Fan Setting Menu - If Equipped
F Series Excavator Monitoring System Controls Setup Menu - If Equipped
F Series Excavator Monitoring System Password Change Menu
F Series Excavator Monitoring System Engine Shutdown Setting Menu
F Series Excavator Monitoring System Current Totals Menu
F Series Excavator Monitoring System Work Tool Select Menu
F Series Excavator Monitoring System Maintenance Intervals Menu
F Series Excavator Monitoring System Override Parameters Menu
F Series Excavator Monitoring System Calibration Menu
F Series Excavator Monitoring System Device Test Menu
2014/09/26 New Improved Advisor Software Is Used on Certain 3600 Engines {1920}
F Series Excavator Monitoring System WinFlash Menu
Broken Bolt Survey for all 3500 Engines{1100, 7553} Broken Bolt Survey for all 3500 Engines{1100, 7553}
XQ2000 Power Module Maintenance Interval Schedule
2014/09/26 New Pressure Sensor Group Is Now Used On Certain Cat® Engines with EMCP 4.x Controls {1924, 4490}
C7.1 Industrial Engine DEF Filler Screen - Clean
C7.1 Marine Engine Inlet Manifold Temperature Sensor
2015/02/02 Improved Pressure Sensor Gp Is Now Used on Certain Cat® Products {1439}
C3.4B Engines DEF Pump Pressure Sensor - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.