C4.4 Engines for Caterpillar Built Machines Caterpillar


Inlet Air Temperature Sensor - Remove and Install

Usage:

C4.4 2W2

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g03686916

  1. 将线束组件 (3) 与进气温度传感器 (2) 断开。

    注: 进气温度传感器有一个双线插头。

  2. 用深孔套筒将进气温度传感器 (2) 从进气歧管 (1) 上拆下。

  3. 将 O 形密封圈 (4) 从进气温度传感器 (2) 上拆下。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 2g03686916

  1. 将新 O 形密封圈安装到进气温度传感器 (2) 上。

  2. 将进气温度传感器 (2) 安装到进气歧管 (1) 上。 用一个深孔套筒将进气温度传感器拧紧至扭矩为 20 N·m (15 lb ft)

  3. 将线束组件 (3) 连接到进气温度传感器 (2) 上。

Caterpillar Information System:

C4.4 Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - Side Mounted Exhaust Manifold
C175-16 PETROLEUM ENGINES Fuel Transfer Pump - Remove and Install
XQC1200 and XQC1600 Power Modules Exhaust Manifold - Remove and Install
C280 Marine Engines Crankcase Pressure Is High
C175-16 PETROLEUM ENGINES Fuel Priming Pump - Remove and Install
XQC1200 and XQC1600 Power Modules Air Inlet Manifold - Remove and Install
455-1192 Top End Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1192 Top End Overhaul Foundational Kit for C18 Marine Engines{1000}
C18 Fire Pump Engine Reference Material
C4.4 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines ECM Mounting Bracket - Remove and Install
C4.4 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C4.4 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C4.4 Engines for Caterpillar Built Machines Turbocharger - Remove - Top Mounted Turbocharger
C4.4 Engines for Caterpillar Built Machines Turbocharger - Install - Top Mounted Turbocharger
C4.4 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C3.4B Engines for Caterpillar Built Machines Cylinder Head
793F and 797F Off-Highway Trucks Braking System E653 Low Secondary Brake Accumulator Pressure
C4.4 Engines for Caterpillar Built Machines Balancer - Remove
C4.4 Engines for Caterpillar Built Machines Balancer - Install
C3.4B Engines for Caterpillar Built Machines Rocker Shaft
C4.4 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install - Engines Without a Balancer Unit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.