E1495
Conditions Which Generate This Code:
EID 1495 Machine Not Obeying Speed Limit
Event code EID 1495 Machine Not Obeying Speed Limit occurs with varying levels of severity. Based on the severity, the autonomous mining truck (AMT) will respond in different ways: limiting machine speed or AMT coming to a complete stop. This event code could be caused by a number of internal network issues. Follow this procedure if an event EID 1495 Machine Not Obeying Speed Limit occurs.
Test Step 1. RESTART SYSTEM.
- Key on AMT and verify status of the event code.
Expected Result:
EID 1495 cleared.
Results:
- EID 1495 cleared. - STOP
- EID 1495 still active. Run AMT at a derated speed. Contact Caterpillar technical support with the information that has been gathered. - STOP
Caterpillar Information System:
Cat® Command For Hauling E1494
Cat® Command For Hauling E1493
Cat® Command For Hauling E1492
Cat® Command For Hauling E1491
Cat® Command For Hauling E1490
Cat® Command For Hauling E1489
Cat® Command For Hauling E1488
Cat® Command For Hauling E1487
Cat® Command For Hauling E1486
390F Excavator Machine Systems Main Control Valve - Remove and Install
C4.4 Marine Generator Set Engine Barring Group
G3306B Generator Sets Emergency Stopping
G3306B Generator Sets Fuel Filter Differential Pressure - Check
C4.4 Marine Generator Set Fan Drive
Cat® Command For Hauling E1496
Cat® Command For Hauling E1497
Cat® Command For Hauling E1509
Cat® Command For Hauling E1510
Cat® Command For Hauling E1536
Cat® Command For Hauling E1537
Cat® Command For Hauling E1540
C8.7 Marine Engines Cooling System
3512C HD and 3516C HD IPP Rental Power Modules Starting - Test
3512C HD and 3516C HD IPP Rental Power Modules Diagnostic Trouble Codes