New Improved Engine Control Software Is Now Available for Certain T4 Interim C13 Industrial Engines Used in Haliburton ADP Blender Applications {7610, 7620}
- Engine:
- C13 (S/N: KWJ1-UP)
New software has been created for Haliburton engines that contain an improved regeneration strategy to allow regeneration during high ambient and high load applications. The new 449-1665 Engine Ratings Electronic Software Gp is adaptable only to Haliburton ADP Blenders.
Show/hide table
NOTICE |
---|
This software should only be used on approved applications as the software poses a risk to the regeneration system. If you are unsure if your application has been approved, contact your A&I engineer before changing from the default engine software. |
Caterpillar Information System:
G3600 A4 Engines Exhaust Temperature - Test
G3600 A4 Engines General Information (Air Inlet and Exhaust System)
G3600 A4 Engines Electronic Control System Operation
345B Excavator and 345B Material Handler Machine System Specifications Track Roller Mounting
XQ375 and XQ425 Rental Generator Sets Safety Messages
2013/12/19 Flywheel UPS Parts Acquisition {1156}
Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383} Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383}
C18 Marine Engine Radiator - Clean
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554} Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
2014/02/06 New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat ® Products {7610, 7620}
C18 Marine Engine Belts - Inspect/Adjust/Replace
2014/05/23 New Maintenance Intervals for Certain Tier 4 Interim Engines Operating in Lesser Regulated Countries {1000}
C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-10 and C-12 Truck Engines
G3516 TA Engine Engine Shutdown or Start Inhibit Initiated by Driven Equipment
C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-15 Truck Engine
2013/12/20 An Alternate Fuel Pressure Gauge for Improved Durability in Some Generator Set Applications {7456}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490} Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
G3600 A4 Engines Ignition Primary - Test
G3600 A4 Engines Ignition Secondary - Test
C4.4 Marine Generator Set High Pressure Fuel Lines
2014/01/31 A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
390F Excavator Machine System System Pressure - Release
2014/02/06 A New Air Intake Hose Between the Air Cleaner and the Turbocharger is Now Available for Certain Excavators {1071}
390F Excavator Machine System Operational Checks