General Information (Air Inlet and Exhaust System)
这些发动机都配有电子控制燃料计量阀和两个带可调节连杆的执行器,从而对排气旁通阀(废气旁通阀)和阻风门进行控制。 电子控制模块(ECM)控制这些功能。 如果出现发动机性能降低或操作问题,请检查以下调整和操作是否正确:
- 执行器和执行器连杆
- 液压油压力正确
- 燃料计量阀
- 燃料质量设置(Btu 和比重)正确
- 预燃室的针阀设置正确
- 进气门间隙正确
- 排气阀间隙
- 气体进入阀间隙
- 排放
当调整燃料质量或针阀时,始终使用废气分析器工具。 进行调整时,务必将控制系统置于 "NOx 反馈"模式。
如果进气或排气系统不通畅的话,发动机的性能就会降低。
空气流过空气滤清器会遇到阻力。 阻力不得超过
背压是出口弯头的排气压力和大气压力的压力差。 排气背压不得超过
Caterpillar Information System:
G3600 A4 Engines Electronic Control System Operation
345B Excavator and 345B Material Handler Machine System Specifications Track Roller Mounting
XQ375 and XQ425 Rental Generator Sets Safety Messages
2013/12/19 Flywheel UPS Parts Acquisition {1156}
Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383} Priming the Jacket Water Heater System on Certain 3500 and C175 Engines{1383}
C18 Marine Engine Radiator - Clean
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554} Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
2014/02/06 New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat ® Products {7610, 7620}
C18 Marine Engine Belts - Inspect/Adjust/Replace
2014/05/23 New Maintenance Intervals for Certain Tier 4 Interim Engines Operating in Lesser Regulated Countries {1000}
336F XE Excavator Machine System Specifications Relief Valve (Line)
320 GC, 320 and 323 Excavator Machine Systems Specifications Final Drive
G3600 A4 Engines Exhaust Temperature - Test
2013/12/23 New Improved Engine Control Software Is Now Available for Certain T4 Interim C13 Industrial Engines Used in Haliburton ADP Blender Applications {7610, 7620}
C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-10 and C-12 Truck Engines
G3516 TA Engine Engine Shutdown or Start Inhibit Initiated by Driven Equipment
C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-15 Truck Engine
2013/12/20 An Alternate Fuel Pressure Gauge for Improved Durability in Some Generator Set Applications {7456}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490} Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
G3600 A4 Engines Ignition Primary - Test
G3600 A4 Engines Ignition Secondary - Test
C4.4 Marine Generator Set High Pressure Fuel Lines
2014/01/31 A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
390F Excavator Machine System System Pressure - Release