Inlet Air Temperature Sensor - Remove and Install
拆卸步骤
- 断开线束组件 (1) 。 拆下温度传感器 (2) 。 拆下 O 形密封圈（未显示）。
Show/hide table
 | |
| 图 1 | g03530054 |
安装步骤
- 按与拆卸相反的顺序安装温度传感器 (2) 。
- 将温度传感器 (2) 拧紧至扭矩为 20 ± 5 N·m (177 ± 44 lb in)。
Caterpillar Information System:
C15 and C18 On-Highway Engines Boost Pressure Sensor - Remove and Install
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412} A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
C15 and C18 On-Highway Engines Front Cover - Remove and Install
C280-16 Engine Crankcase Explosion Relief Valve - Remove and Install
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C15 and C18 On-Highway Engines Vibration Damper and Pulley - Remove and Install
C4.4 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
C15 and C18 On-Highway Engines Belt Tensioner - Remove and Install - Fan Belt Tensioner
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479} Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C15 and C18 On-Highway Engines Belt Tensioner - Remove and Install - Alternator Belt Tensioner
C280-16 Engine Prelubrication Oil Pump - Remove and Install
C280-16 Engine Air Starting Motor - Remove and Install
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Engine Operation
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C9.3 Tier 4 Final Engines Flexible Exhaust Pipe
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (PWM) - Test