New Thermostats Are Now Used for Jacket Water Heater on Certain Cat Gensets and Cat Engines {1383}
- Electric Power Generation:
- 3512 GEN SET (S/N: ZAF1-UP)
- Engine:
- 3512 (S/N: YAK1-UP)
- 3512B GENSET (S/N: ZAH1-UP; ZAJ1-UP)
- 3516B GEN SET (S/N: ZAP1-UP)
- 3516C GEN SET (S/N: SBK1-UP)
- C175-16 GEN SET (S/N: WYB1-UP)
- 3512B (S/N: YAM1-UP; YAZ1-UP)
- 3512C (S/N: SBG1-UP)
- 3516 (S/N: YAS1-UP)
- 3516B (S/N: YAP1-UP; PBR1-UP; YAR1-UP; ZAR1-UP; YAT1-UP; YAW1-UP)
- 3516C (S/N: SBJ1-UP)
Description of Change: The new thermostat is pre-set at the factory. The former thermostat has dials for adjustment of the temperature. The new thermostat has improved cycle rate and improved contact performance.
Adaptable To: The replacement part numbers for the former part numbers are given in the Table 1. The former thermostat is not canceled.
Show/hide table
Qty     | New Part Number     | Former Part Number     | Description     |
---|---|---|---|
1     | 378-4327     | 300-4967     | Thermostat     |
1     | 388-6916     | 307-3274     | Thermostat     |
1     | 378-4328     | -     | Bracket     |
2     | 212-3416     | 212-3416     | Screw     |
Show/hide table
Illustration 1 | g03038877 |
Adjustable Thermostat (1) Old Bracket Design |
Show/hide table
Illustration 2 | g03038878 |
Fixed Thermostat (2) New Bracket Design |
The temperature ranges for the new thermostats is given in Table 2 and temperature ranges for the former thermostats is given in Table 3.
Note: Either 378-4327 Thermostat or 388-6916 Thermostat can be used for replacement depending on preferred temperature range.
Show/hide table
New Thermostats     | Fixed Temperature (With a dead band of 30° F)     |
378-4327 Thermostat     | 130° F     |
388-6916 Thermostat     | 150° F     |
Show/hide table
Former Thermostats     | Adjustable Temperature (With a dead band of 20° F)     |
300-4967 Thermostat     | 90° F - 130° F     |
307-3274 Thermostat     | 120° F - 160° F     |
Caterpillar Information System:
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Fuel Filter Differential Pressure - Check - Gas Fuel System
G3500H 50Hz Generator Sets Flexible Coupling - Inspect
C27 Generator Set Air Shutoff - Test
C18 Marine Auxiliary and Marine Generator Set Engines Engine Oil Pressure - Test
320D2 and 323D2 Excavators Machine Systems Specifications Boom Cylinder Lines
C32 Marine Engines Valve Mechanism Cover - Remove and Install
3516B Engine Vibration Damper - Remove and Install
2012/08/28 A New Aftercooler Cover, Base Assembly, and Mounting Hardware Are Used on Certain C18 Marine Engines {1063}
C27 Generator Set Model View Illustrations
2012/08/10 Clarification on the Bracket for Use with the Front Oil Cooler Bonnet on Certain 3500 Engines {0635, 1380}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Maintenance Interval Schedule
C27 Generator Set Maintenance Interval Schedule - Standby
G3500H 50Hz Generator Sets Generator - Dry
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Hoses and Clamps - Inspect/Replace
PM3516 Power Modules Starting Motor - Inspect
3516B Engine Crankshaft Front Seal and Wear Sleeve - Install
3516B Engine Flywheel - Remove and Install
Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171} Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171}
3516B Engine Flywheel Housing - Remove
C18 Marine Engines Engine Stalls at Low RPM
3516B Engine Engine Oil Sequence Valves - Remove and Install
3516B Engine Gear Group (Rear) - Remove
G3500H 60Hz Generator Sets Spark Plugs - Inspect/Adjust/Replace
C32 Auxiliary Engine Control Panel - Cat Marine Engine Control Panel I (MECP I) (If Equipped)