Boom Cylinder Lines
Show/hide table
Illustration 1 | g03476100 |
Typical example |
Show/hide table
Specification for 373-1110 Boom Cylinder Lines Gp and 373-1115 Boom Cylinder Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 5 | 8T-4648 Bolt | Torque to |
2 | 2 | 457-5821 Bolt | Torque to |
B | - | - | Orientation of support assemblies is 50 ± 3 degrees. |
C | - | - | The distance from the center of the mounting pin to the center of the support assemblies is |
Caterpillar Information System:
C32 Marine Engines Valve Mechanism Cover - Remove and Install
3516B Engine Vibration Damper - Remove and Install
2012/08/28 A New Aftercooler Cover, Base Assembly, and Mounting Hardware Are Used on Certain C18 Marine Engines {1063}
C27 Generator Set Model View Illustrations
2012/08/10 Clarification on the Bracket for Use with the Front Oil Cooler Bonnet on Certain 3500 Engines {0635, 1380}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Maintenance Interval Schedule
C27 Generator Set Maintenance Interval Schedule - Standby
C18 Marine Auxiliary and Marine Generator Set Engines Engine Shutdown Occurrence
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Maintenance Interval Schedule
C27 Generator Set Maintenance Interval Schedule - Prime Power
C32 Marine Engines Housing (Front) - Remove
3116 and 3126 Marine Engines Electrical System
C18 Marine Auxiliary and Marine Generator Set Engines Engine Oil Pressure - Test
C27 Generator Set Air Shutoff - Test
G3500H 50Hz Generator Sets Flexible Coupling - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Fuel Filter Differential Pressure - Check - Gas Fuel System
2012/08/07 New Thermostats Are Now Used for Jacket Water Heater on Certain Cat Gensets and Cat Engines {1383}
G3500H 50Hz Generator Sets Generator - Dry
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Hoses and Clamps - Inspect/Replace
PM3516 Power Modules Starting Motor - Inspect
3516B Engine Crankshaft Front Seal and Wear Sleeve - Install
3516B Engine Flywheel - Remove and Install
Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171} Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171}
3516B Engine Flywheel Housing - Remove