Relief Valve (Line)
Show/hide table
| |
| Illustration 1 | g02511956 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 1 | Relief Valve Gp | Torque to |
| 2 | 1 | 6I-6795 Spring | Length under test force is Test force is Free length after test is |
| 3 | 1 | 095-1786 Backup Ring | Lubricate the bore of the backup ring lightly with the lubricant that is being sealed. |
| 4 | 1 | 4I-3510 Spring | Length under test force is Test force is Free length after test is |
| 5 | 1 | 171-0035 Holder | Torque to |
| 6 | 1 | 4I-7714 Nut | Torque to |
| 7 | 1 | 095-1587 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 8 | 1 | 095-1590 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 9 | 1 | 095-1579 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
Caterpillar Information System:
3500C Marine Engines Monitoring System - Diagnostic Codes and Event Codes
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions - Configure
3516C Generator Set Engines Data Link - Test
2011/11/03 An Improved Coupler is Used on Certain Petroleum Transmissions {3252}
2011/11/14 Hydraulic Control Modifications for TH48-E80 Petroleum Transmission and SPF343C Pumper Transmission {3074, 3083, 3167}
3500 Generator Sets Refill Capacities
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Connector Contact Description
2011/10/31 An Improved Inlet Manifold Pressure Sensor Is Used with Certain G3516C and G3520C Generator Set Engines {1408, 1439, 1917}
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924} A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924}
C18 Generator Sets Mounting and Dismounting
3500B Generator Sets Engine Crankcase Breather - Clean/Replace
3516C Generator Set Engines Electronic Service Tool Does Not Communicate
312F and 313F Excavator Machine System Specifications Refrigerant Compressor Mounting
Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426} Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426}
C32 Auxiliary Engine Control Panel - Cat Marine Engine Control Panel III (MECP III )(If Equipped)
C32 Marine Engine Fluid Recommendations
C18 Generator Sets Product Lifting
C27 and C32 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
793F CMD Off-Highway Truck Steering Electronic Control System Service Tools