Refill Capacities
Prostornina sistema mazanja motorja vključuje prostornino oljnih filtrov, ki so nameščeni v tovarni. Dodatni sistemi za filtriranje olja (če so vgrajeni) zahtevajo dodatno olje. Glejte tehnične podatke proizvajalca dodatnega sistema za filtriranje olja.
Show/hide table
| Približne polnilne količine za sisteme mazanja motorja 3500B | ||
| Prostor ali sistem | Motorji 3512B | Motorji 3516B |
| Okrov ročične gredi motorja | |
|
Za ustrezno vzdrževanje hladilnega sistema morate poznati skupno prostornino hladilnega sistema. Skupna prostornina hladilnega sistema se bo med posameznimi stroji razlikovala. Skupna prostornina hladilnega sistema lahko vključuje naslednje sestavne dele: motor, izenačevalno posodo, toplotni izmenjevalnik, hladilnik in cevi.
Glejte specifikacije družbe Caterpillar ali navodila stroja (OEM). Zabeležite skupno prostornino hladilnega sistema v ustrezni tabeli.
Show/hide table
| Približne polnilne količine za hladilne sisteme sklopa generatorja 3500B | |||
| Engine (Motor) | Hladilnik | Prostornina hladilnega sistema | |
| Motor 3512B | |
|
|
| Motor 3512B(1) | |
|
|
| Motor 3516B(2) | |
|
|
| Motor 3516B(3) | |
|
|
| Motor 3516B(4) | |
|
Show/hide table
| (1) | 60-Hz motor za temperature okolja do |
| (2) | 50-Hz motor za temperature okolja do |
| (3) | 60-Hz motor za temperature okolja do |
| (4) | 60-Hz motor za temperature okolja do |
Caterpillar Information System:
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Connector Contact Description
2011/10/31 An Improved Inlet Manifold Pressure Sensor Is Used with Certain G3516C and G3520C Generator Set Engines {1408, 1439, 1917}
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
316E Excavator Machine System Specifications Window Wiper - Front, Upper
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
2011/11/14 Hydraulic Control Modifications for TH48-E80 Petroleum Transmission and SPF343C Pumper Transmission {3074, 3083, 3167}
2011/11/03 An Improved Coupler is Used on Certain Petroleum Transmissions {3252}
3516C Generator Set Engines Data Link - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions - Configure
3500C Marine Engines Monitoring System - Diagnostic Codes and Event Codes
336E Excavator Machine System Specifications Relief Valve (Line)
A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924} A New Control for Monitoring Combustion and Exhaust Temperatures Is Used for Certain G3600 Engines {1917, 1924}
C18 Generator Sets Mounting and Dismounting
3500B Generator Sets Engine Crankcase Breather - Clean/Replace
3516C Generator Set Engines Electronic Service Tool Does Not Communicate
312F and 313F Excavator Machine System Specifications Refrigerant Compressor Mounting
Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426} Failure of the Bulkhead Ignition Harness Connector on Certain G3508B Engines{1408, 4460, 7426}