A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
- Engine:
- 3516B (S/N: TAK1-UP)
Description of Change: The new hose assembly has different installation geometry and the new hose assembly is made from a more durable material than the former hose assembly. The new hose assembly has an improved service life.
Adaptable To:
The new 379-0210 Hose As replaces the 9G-2653 Hose As on the above engines. The 9G-2653 Hose As is not canceled.
The new 379-0210 Hose As is adaptable to the above engines back to first production.
The new 379-0210 Hose As is effective with serial number TAK00016.
Installation Instructions
- Disconnect hose assembly (1) from the flared reducers (2) at each end of the hose assembly. Remove flared reducers (2) .
Show/hide table
Illustration 1 | g02743016 |
(1) 9G-2653 Hose As (2) 5P-8228 Flared Reducer |
- Rotate elbow (3) for 90 degrees in the counterclockwise direction as shown in Illustration 2.
Show/hide table
Illustration 2 | g02743019 |
(3) Elbow (4) Elbow (5) 379-0210 Hose As |
- Rotate elbow (4) for -30 degrees from vertical as shown in Illustration 2.
- Install hose (5). Upon final installation, make sure that the hose has no contact or interference with any other object.
Caterpillar Information System:
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
316E Excavator Machine System Specifications Window Wiper - Front, Upper
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
2012/02/07 New O-rings Are Now Used on Certain C27 / C32 Commercial Oil Pan Groups {1302}
320E and 323E Excavators Machine System Specifications Stick Lines
3516C Generator Sets Control Panel - Inspect/Test
307E2 Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
Initial Start-Up Procedure for CG137 and G3300B Engines {1000} Initial Start-Up Procedure for CG137 and G3300B Engines {1000}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}
2011/10/31 An Improved Inlet Manifold Pressure Sensor Is Used with Certain G3516C and G3520C Generator Set Engines {1408, 1439, 1917}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Connector Contact Description
3500 Generator Sets Refill Capacities
2011/11/14 Hydraulic Control Modifications for TH48-E80 Petroleum Transmission and SPF343C Pumper Transmission {3074, 3083, 3167}
2011/11/03 An Improved Coupler is Used on Certain Petroleum Transmissions {3252}
3516C Generator Set Engines Data Link - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions - Configure
3500C Marine Engines Monitoring System - Diagnostic Codes and Event Codes
336E Excavator Machine System Specifications Relief Valve (Line)