Engine Valve Lash - Check
附註調整汽門間隙之程序請參閱測試和調整, "汽門間隙調整"。 如需協助,請諮詢 Cat 代理商。
Show/hide table
注意事項 |
---|
只有有資格的修理人員才可執行這些保養。 請參閱 系統操作/測試和調整手冊, "汽門間隙和汽門橋調整"一文,或向您的卡特彼勒代理商諮詢有關完整的汽門間隙調整步驟。 如閥門調整不正確,則卡特彼勒引擎的運轉可能降低其的效率。 此縮減的功率會導致過多的燃料使用量和/或減少引擎組件的壽命。 |
若汽門間隙在容許範圍內,則不需調整汽門間隙。
請在引擎冷卻後調整汽門間隙。 引擎停機且拆下汽門蓋後,可將引擎視為已冷卻。 進行保養前,應防止異物進入汽缸蓋頂部和汽門機構。 徹底清理汽門機構外蓋周遭。
如需閥間隙設定,請參閱測試及調整, "閥間隙 - 調整"。
Caterpillar Information System:
C175 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C175 Generator Sets Coolant Sample (Level 2) - Obtain
C175 Generator Sets Coolant Sample (Level 1) - Obtain
C175 Generator Sets Coolant Level - Check
C175 Generator Sets Coolant Extender (ELC) - Add
C175 Generator Sets Coolant (ELC) - Change
C18 Marine Generator Set Overhaul (Major)
C18 Marine Generator Set Overhaul (Top End)
797F and 797F XQ Off-Highway Trucks Machine Systems Rear Axle Oil Cooler - Remove and Install
C175 Generator Sets Coolant (DEAC) - Change
C175 Generator Sets Control Panel - Inspect/Test
Reassembly of the Throttle Body for Certain G3516B Engines{1265} Reassembly of the Throttle Body for Certain G3516B Engines{1265}
C175 Generator Sets Space Heater - Test
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225} Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Rework Procedure for the Connection of Speed Adjust Circuit to Control Panels on Certain C4.4Powered Generating Sets{7332, 7451} Rework Procedure for the Connection of Speed Adjust Circuit to Control Panels on Certain C4.4Powered Generating Sets{7332, 7451}
C175 Generator Sets Varistor - Inspect
Idler Oil Fill Volume {4159, 4159} Idler Oil Fill Volume {4159, 4159}
C13, C15, and C18 Tier 4 Interim Engines Cat ET Service Features
C15 and C18 Engines Compression Brake - Inspect/Adjust/Replace
C4.4 Industrial Engine Air Inlet and Exhaust System - Inspect
C4.4 Industrial Engine Valve Mechanism Cover
C27 and C32 Engines for Caterpillar Built Machines Electronic Control System Components
C9.3 Engines for Caterpillar Built Machines Unit Injector - Remove