New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
Usage:
3516 Locomotive Engines
Description of Change: A new gasket is used between the flanges of the manifolds and the bellow assemblies. The new gasket has a stainless steel wrap on the inner side towards the exhaust gases. The stainless steel wrap shields the gasket material from the hot exhaust gases and provides additional thickness to improve sealing.
Adaptable To: The new 7E5261 Exhaust Manifold Gasket is a direct replacement for the former 7W8146 Exhaust Manifold Gasket which has been canceled. The new gasket is effective with 3516 Engine 9KF48.
Location of gasket (typical example).
Caterpillar Information System:
1989/11/13 New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13 Engine Coolant Can Be Recycled{1395}
1989/11/06 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06 Narrow Wear Rings Now Used On All Hydraulic Cylinder Rods{4303}
1989/11/06 Procedure To Lessen Governor Control Lever Effort{1265}
1989/10/30 Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/10/30 New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group{3354,3279}
1989/10/30 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30 Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
1989/10/30 New Service Tools Available{0600,0700}
1989/11/13 Cylinder Liner Changes{1216}
1989/11/20 Effective Dates, Serial Numbers and Features Of PEEC Personality Modules{1705,1707}
1989/11/27 Spark Plug Gasket Available{1550,1555}
1989/11/27 New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27 Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel{1052}
1989/11/27 Failures Of Unit Injector O-Ring Seals{1290}
1989/11/27 Electrostatic Painting And/Or Incorrect Welding Can Cause Permanent Damage To Electronic Control Module (ECM){1706}
1989/11/27 New Turbocharger, Piston And Fuel Ratio Control Used{1052,1214,1215,1278}
1989/12/11 4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11 Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11 New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters){1209,1210}
1989/12/11 New Spark Plug Used In Ignition Groups{1555}