C13 Engine for Caterpillar Built Machines Caterpillar

Removal Procedure

Start By:

1. Remove the cylinder head.

Show/hide table

Illustration 1	g01131781

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

1. Use Tooling (A) to remove retainer locks (1).

2. Remove valve rotators (2).

3. Remove valve springs (3) and valve springs (4).

4. Remove base (5).

5. Remove valves (6) from the cylinder head.

6. Remove valve seals (7).

Installation Procedure

Show/hide table

The valve keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve keepers and valve springs during the installation of the valves.

Note: A small amount of grease can be used to hold the retainer locks in position during installation.

Note: Lubricate valves (6) with clean engine oil.

1. Install valves (6) in reverse order of removal.