C6.6 Industrial Engine Caterpillar


Lifter Group

Usage:

C6.6 667


Illustration 1g01866794
Typical example

(A) Diameter of the lifter body ... 21.938 to 21.963 mm (0.86370 to 0.86468 inch)

Bore diameter in the cylinder block ... 22.000 to 22.032 mm (0.86614 to 0.86740 inch)

Clearance

Clearance of the lifter ... 0.037 to 0.094 mm (0.00146 to 0.00370 inch)

Caterpillar Information System:

C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C6.6 Industrial Engine Fuel Filter Base - Single Secondary Fuel Filter Base
C6.6 Industrial Engine Fuel Injection Pump
C7.1 Industrial Engine and Generator Set Indicator Lamps
C6.6 Industrial Engine Fuel Injection Lines
G3520B Engine Maintenance Interval Schedule
C32 Marine Engine Battery Problem
C13, C15, and C18 Tier 4 Interim Engines Alternator Problem - Charging Problem and/or Noisy Operation
C15 and C18 Industrial Engines Fumes Disposal Filter - Remove and Install
C6.6 Industrial Engine Atmospheric Pressure Sensor
Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206} Procedure to Flush the Fuel System for the Aftertreatment Regeneration Device (ARD){3206}
C9.3 Tier 4 Interim Engines Coolant Temperature Is Low
C9.3 Tier 4 Interim Engines Engine Cranks but Does Not Start
C15 and C18 Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Backup Alarm Does Not Function
C12 Marine Engines Heat Exchanger - Inspect/Clean
793F and 797F Off-Highway Trucks Braking System Brakes Drag
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - C15 Engine
C13 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C6.6 Industrial Engine Cylinder Head Valves
C6.6 Industrial Engine Main Bearing Journal
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.