C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Flywheel Housing

Usage:

826K 2L3


图 1g02726783


图 2g02726782

表 1
262-4393 飞轮壳体总成的技术规格 
项目  数量  零件  技术规格说明 
组装期间,飞轮壳体的前表面和缸体的后表面必须没有机油、燃油、水、密封垫粘合剂和任何其他污染物。 涂覆超蓝 Loctite 587 以便密封缸体、飞轮壳体和发动机油底壳的接合处。 
组装前,将超蓝 Loctite 587 涂覆到位置 (4)。 组装后,将超蓝 Loctite 587 涂覆到位置 (5)。 
165-3929 螺栓  按照下列步骤拧紧飞轮壳体的螺栓:
1.按照图 2 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 100 ± 20 N·m (75 ± 15 lb ft)
2. 按照图 2 中所示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 40 ± 10 N·m (30 ± 7 lb ft)
3. 再次按照图 2 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)
4. 再次按照图 2 中所示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
165-3931 螺栓 
5J-5793 螺栓 

Caterpillar Information System:

G3408C and G3412C Engines Engine Oil Filter Base
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Oil - Test
C27 and C32 Industrial Engines Product Lifting
Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioning Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Troubleshooting Condensate Drainage System
C32 Petroleum Engines Model View Illustrations
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
2008/05/12 Improved Water Pump {1361}
G3408C and G3412C Engines Camshaft Bearing Position
Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408} Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408}
Air Conditioning and Heating R134a for All Caterpillar Machines Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Flush
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Code List
Testing the Refrigerant Compressor Protection Module{1408, 1802} Testing the Refrigerant Compressor Protection Module{1408, 1802}
3512B Petroleum Engine Maintenance Recommendations
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Heater Performance - Test
C175-16 and C175-20 Generator Set Engines Lubrication System Operation
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225} Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
C6.6 Marine Generator Set Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.