G3408C and G3412C Engines Caterpillar


Engine Oil Filter Base

Usage:

G3408C 3WR



Illustration 1g01519576

(3) Engine oil filter assembly

(1) 4N-8150 Spring

Quantity ... 2
Length under test force ... 55.24 mm (2.175 inch)
Test force ... 75.619 ± 5.800 N (17.0 ± 1.3 lb)
Free length after test ... 93.726 mm (3.6900 inch)
Outside diameter ... 20.6 mm (0.81 inch)

Pressure difference for opening of the engine oil filter bypass valve ... 192 kPa (28 psi)

Note: Apply 154-9731 Thread Lock Compound on the tapered end of the hollow stud.

(2) Torque for the hollow stud ... 82 ± 13 N·m (60 ± 10 lb ft)

Caterpillar Information System:

Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Oil - Test
C27 and C32 Industrial Engines Product Lifting
Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioning Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Troubleshooting Condensate Drainage System
C32 Petroleum Engines Model View Illustrations
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
2008/05/12 Improved Water Pump {1361}
G3408C and G3412C Engines Camshaft Bearing Position
Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408} Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408}
Air Conditioning and Heating R134a for All Caterpillar Machines Heating System Troubleshooting
C27 and C32 Industrial Engines Fuel System - Prime
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Flush
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Code List
Testing the Refrigerant Compressor Protection Module{1408, 1802} Testing the Refrigerant Compressor Protection Module{1408, 1802}
3512B Petroleum Engine Maintenance Recommendations
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Heater Performance - Test
C175-16 and C175-20 Generator Set Engines Lubrication System Operation
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225} Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.