Fuel Lines
Show/hide table
 | |
| Illustration 1 | g01417789 |
Top view of engine | |
(1) Torque for the two joint tube assemblies ... 16.0 ± 0.5 N·m (12 ± 1 lb ft)
Caterpillar Information System:
2007/10/01 Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
2007/09/01 O-ring Aids in Engine Break-in {1251, 1290}
2007/09/24 O-ring Aids in Engine Break-in {1251, 1290}
Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610} Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610}
TH31 Well Servicing Transmissions Transfer Gears - Assemble
2007/09/24 Improved Software that Helps to Conserve Ether is Available {1901, 1902, 7620}
TH31 Well Servicing Transmissions Transfer Gears - Disassemble
Reconditioning Dimensions for Idlers {4159} Reconditioning Dimensions for Idlers {4159}
G3520B Engine Model View Illustrations
G3408C and G3412C Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
14L Motor Grader Relief Valve (Main) - Assemble
14L Motor Grader Relief Valve (Main) - Disassemble
2007/10/01 Improved Fuel Transfer Pump {1258, 1260}
G3520B Engines Fuel Lines
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
2007/10/01 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
2007/10/08 Improved Low Coolant Level Sensors On Generator Sets {1439, 7470}
Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
G3500 Engines Thermostatic Valve
3608 Engine General Information - Reference Material
2007/10/15 Piston and Ring Wear {1225}
G3520B Engine Safety Messages
C15 and C18 Petrolem Generator Set Engines Event Codes
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}