The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
- Oil/Gas Well Servicing Transmission and Oil/Gas Well Servicing Power System:
- TH31-E61 (S/N: LAD1-UP; SKY1-UP)
- TH35-E81 (S/N: MSB1-UP; TZM1-UP; PZT1-UP)
The latest change for the 307-4440 Oil Level Gauge Gp (Dipstick) improves the readability and ease of insertion into the tube. The improved dipstick should always be used with the 263-6058 Tube As. If the transmission is equipped with the old 251-6086 Tube As, replace the old 251-6086 Tube As with the new 263-6058 Tube As before you use the new 307-4440 Oil Level Gauge Gp (Dipstick).
Show/hide table
Illustration 1 | g01418442 |
New 307-4440 Oil Level Gauge Gp (Dipstick) |
Show/hide table
Illustration 2 | g01420164 |
Old 251-6086 Tube As |
Show/hide table
Illustration 3 | g01420165 |
New 263-6058 Tube As |
Caterpillar Information System:
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
G3520B Engines Fuel Lines
2007/10/01 Improved Fuel Transfer Pump {1258, 1260}
G3520B Engines Fuel Lines
2007/10/01 Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
2007/09/01 O-ring Aids in Engine Break-in {1251, 1290}
2007/09/24 O-ring Aids in Engine Break-in {1251, 1290}
Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610} Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610}
TH31 Well Servicing Transmissions Transfer Gears - Assemble
2007/09/24 Improved Software that Helps to Conserve Ether is Available {1901, 1902, 7620}
TH31 Well Servicing Transmissions Transfer Gears - Disassemble
Reconditioning Dimensions for Idlers {4159} Reconditioning Dimensions for Idlers {4159}
2007/10/08 Improved Low Coolant Level Sensors On Generator Sets {1439, 7470}
Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
G3500 Engines Thermostatic Valve
3608 Engine General Information - Reference Material
2007/10/15 Piston and Ring Wear {1225}
G3520B Engine Safety Messages
C15 and C18 Petrolem Generator Set Engines Event Codes
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}
Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610} Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610}
C18 Petroleum Generator Sets Maintenance Interval Schedule - Prime Power
C18 Petroleum Generator Sets Maintenance Interval Schedule - Standby
C9 Petroleum Engines Jacket Water Heater