Improved Fuel Transfer Pump {1258, 1260}
- Industrial Engine:
- 3054C (S/N: 3341-18429)
- 3054E (S/N: 3041-3675)
The following information applies to 3054C and 3054E engines. There have been incidents of fuel transfer pumps that operate in an intermittent state. There have been incidents of fuel transfer pumps that fail to maintain pressure.
An improved 299-9265 Fuel Priming Pump and Primary Filter Gp is now available to overcome the problems.
Caterpillar Information System:
G3520B Engines Fuel Lines
2007/10/01 Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
2007/09/01 O-ring Aids in Engine Break-in {1251, 1290}
2007/09/24 O-ring Aids in Engine Break-in {1251, 1290}
Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610} Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610}
TH31 Well Servicing Transmissions Transfer Gears - Assemble
2007/09/24 Improved Software that Helps to Conserve Ether is Available {1901, 1902, 7620}
TH31 Well Servicing Transmissions Transfer Gears - Disassemble
Reconditioning Dimensions for Idlers {4159} Reconditioning Dimensions for Idlers {4159}
G3520B Engine Model View Illustrations
G3408C and G3412C Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
14L Motor Grader Relief Valve (Main) - Assemble
G3520B Engines Fuel Lines
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
2007/10/01 The Dipstick for Certain OEM Transmissions Has Been Improved {3005, 3081}
2007/10/08 Improved Low Coolant Level Sensors On Generator Sets {1439, 7470}
Repair of the Oil Filler Tube {1316} Repair of the Oil Filler Tube {1316}
G3500 Engines Thermostatic Valve
3608 Engine General Information - Reference Material
2007/10/15 Piston and Ring Wear {1225}
G3520B Engine Safety Messages
C15 and C18 Petrolem Generator Set Engines Event Codes
Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451} Check for the Correctly Wired 226-3423 Control Panel Gp (Alarm Panel, Key Switch){4490, 7451}
Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610} Using the Caterpillar Electronic Technician (ET) Data Log{0785, 7610}