2015/06/26 Caterpillar


New Software Is Now used on Certain C11 Engines {7620}

Usage:

C11 B5K
Industrial Engine:
C11 INDUSTRIAL (S/N: HRA1-UP; GLS1-UP)
Petroleum Engine:
C11 PETROLEUM (S/N: B5K1-UP; B5Z1-UP)
Petroleum Power Train Package:
CX31-P600-C11I (S/N: PDY1-UP)
TH35-C11I (S/N: PBZ1-UP)

Description of Change: The engine software has been improved by improving the air/fuel ratio at start up to prevent any black or white smoke.

Adaptable To: The new 473-3028 Engine Software replaces the existing 367-9430 Engine Software. The new engine software is adaptable back to first production on the serial numbers listed above.

This change is effective for the serial numbers listed in Table 1.

Table 1
Effective Serial Numbers    
S/N:B5K00188-UP    
S/N:B5Z00573-UP    
S/N:GLS04200-UP    
S/N:HRA02401-UP    
S/N:PBZ00002-UP    
S/N:PDY00161-UP    

Caterpillar Information System:

980G Wheel Loader Machine Systems Brake Accumulator - Disassemble
980G Wheel Loader Machine Systems Brake Accumulator - Assemble
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
AD60 Underground Articulated Truck Steering System General Information
AD60 Underground Articulated Truck Hydraulic System General Information
963K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 963K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
Procedure to Rework VIMS Now Available for Certain AD60 Underground Articulated Trucks Installed with Payload and the VIMS Main Module System {7610, 7620} Procedure to Rework VIMS Now Available for Certain AD60 Underground Articulated Trucks Installed with Payload and the VIMS Main Module System {7610, 7620}
Ordering a Replacement PIN Plate on Some Medium Track-Type Tractors and Pipelayers{7557, 7563} Ordering a Replacement PIN Plate on Some Medium Track-Type Tractors and Pipelayers{7557, 7563}
D11R Track-Type Tractor C32 Engine Retrofit Supplement Reference Material
D11R Track-Type Tractor C32 Engine Retrofit Supplement Radiator Core - Clean
C4.4 and C7.1 Engines Speed Control - Test - Analog
D6K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2015/07/02 A New Hose Clamp Is Now Used In the Heater Lines Group On Certain D6N Track-Type Tractors {7304}
2015/07/13 Fully Assembled Open Differential Center Section Available for Service Replacement Part {3254, 3256, 3258}
Installation of Lower Guards On Certain 950M and 962M Medium Wheel Loaders{0679, 7051, 7150} Installation of Lower Guards On Certain 950M and 962M Medium Wheel Loaders{0679, 7051, 7150}
2015/06/30 Improved Cylinder Piston Bolt Retention Now Used on Certain 525C, 535C, and 545C Wheel Skidders {0649, 4303, 5456, 5557, 7562}
A New Heat Shield Assembly Is Used on Certain C13 Machine Engines {1067, 1073} A New Heat Shield Assembly Is Used on Certain C13 Machine Engines {1067, 1073}
MD6200 Rotary Drill Drill Operation
C4.4 and C7.1 Engines Service Tool Features
C4.4 and C7.1 Engines Service Tool Error Identifiers
D6N Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D6N Track-Type Tractor Machine Systems Piston Pump (Steering) - Disassemble
D6N Track-Type Tractor Machine Systems Piston Pump (Steering) - Assemble
2015/06/19 An Improved Water Pump System Is Now Used On Certain D7E Track-Type Tractors {1361, 1380, 1408}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.