D11R Track-Type Tractor C32 Engine Retrofit Supplement Caterpillar


Engine Oil Level - Check

Usage:

D11R 7PZ

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.



NOTICE

Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.




    Illustration 1g01424605

  1. Open the front engine access door that is on the left side of the machine.


    Illustration 2g01230331


    Illustration 3g01230334
    (A) Full mark at the engine running position("SAFE OPERATING RANGE")
    (B) Full mark with cold engine oil ("SAFE STARTING RANGE")

  2. Check the "SAFE OPERATING RANGE" side of dipstick (1) while the engine is running at low idle. The oil should be at operating temperature. Maintain the oil level to the "FULL" mark.

    Check the "SAFE STARTING RANGE" side of dipstick (1) before starting the engine when the engine oil is cold. Maintain the oil level to the "FULL" mark.

    Note: When operating the machine on severe slopes, the oil level in the engine crankcase must be in the "SAFE OPERATING RANGE" zone of the dipstick.

  3. Remove oil filler cap (1). If necessary, add oil.

  4. Clean the oil filler cap and install the oil filler cap.

  5. Close the engine access door.

Caterpillar Information System:

Sorting Grapple Fork (Log and Lumber) Rated Load
Sorting Grapple Fork (Log and Lumber) Approved Machines
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Mounts and Crankshaft Vibration Damper - Inspect
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Crankcase Breather - Clean
2015/06/25 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}
Sorting Grapple Fork (Log and Lumber) Specifications
980L Wheel Loader Hydraulic System Oil Sample - Obtain
2015/06/25 Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
D11R Track-Type Tractor C32 Engine Retrofit Supplement Electronic Unit Injector - Inspect/Adjust
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Water Temperature Regulator - Replace
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Coolant Sample (Level 2) - Obtain
3516E Engine for 994K Wheel Loaders Oil Level Is Low
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Oil Sample - Obtain
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Oil and Filter - Change
D11R Track-Type Tractor C32 Engine Retrofit Supplement Engine Valve Lash - Check/Adjust
D11R Track-Type Tractor C32 Engine Retrofit Supplement Fuel System - Prime
D11R Track-Type Tractor C32 Engine Retrofit Supplement Fuel System Primary Filter (Water Separator) - Drain
D11R Track-Type Tractor C32 Engine Retrofit Supplement Fuel System Primary Filter - Clean/Replace
D11R Track-Type Tractor C32 Engine Retrofit Supplement Fuel System Secondary Filter - Replace
D6K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6K Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C4.4 and C7.1 Engines Speed Control - Test - Analog
D11R Track-Type Tractor C32 Engine Retrofit Supplement Radiator Core - Clean
D11R Track-Type Tractor C32 Engine Retrofit Supplement Reference Material
Ordering a Replacement PIN Plate on Some Medium Track-Type Tractors and Pipelayers{7557, 7563} Ordering a Replacement PIN Plate on Some Medium Track-Type Tractors and Pipelayers{7557, 7563}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.