Coolant Temperature Sensor
Show/hide table
| |
| Illustration 1 | g01256387 |
(1) Sensor assembly
- Tighten the sensor assembly to the following torque. ...
20 ± 3 N·m (15 ± 2 lb ft)
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Turbocharger - Install
3500B and 3500C Locomotive Engines Air Shutoff System
C7 PETROLEUM Petroleum Engine Turbocharger - Remove
C15 Industrial Engine Idle Shutdown Timer - Test
C3.3 and C4.4 Generator Sets Valve Mechanism Cover - Remove and Install - Four Cylinder Engines
G3500 Engines After Starting Engine
C3.3 and C4.4 Generator Sets Crankcase Breather - Remove and Install
G3500 Engines Starting with Jump Start Cables
G3500 Engines Water Temperature Regulator - Replace
C3.3 and C4.4 Generator Sets Fuel Injection Lines - Remove and Install
C3.3 and C4.4 Generator Sets Fuel Priming Pump and Fuel Filter Base - Remove and Install
G3500 Engines Actuator Control Linkage - Lubricate
G3500 A3 Engines Engine Overcrank
G3500 A3 Engines Engine Overload
C3.3 Industrial Engine Crankshaft Rear Seal - Remove
C3.3 Industrial Engine Crankshaft Rear Seal - Install
C7 PETROLEUM Petroleum Engine Exhaust Manifold - Remove and Install
C7 On-Highway Engine Clean Gas Induction Cooler - Remove and Install
G3508, G3512 and G3516 Engines Crankshaft - Remove
C280 Marine Auxiliary Engines Self-Diagnostics
C280 Marine Propulsion Engines Intermittent Engine Shutdown
Air Conditioning and Heating R134a for All Caterpillar Machines Identifying the Air Conditioning System
C7 PETROLEUM Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
C13 and C15 On-Highway Engines Emissions Certification Film