Valve Mechanism Cover - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1).
- Remove valve mechanism cover (2).
Show/hide table
Illustration 1 | g01254928 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position valve mechanism cover (2) on the engine.
- Install bolts (1). Tighten bolts (1) in a numerical sequence to a torque of
15 ± 3 N·m (11 ± 2 lb ft) .
Show/hide table
Illustration 2 | g01254928 |
Show/hide table
Illustration 3 | g01212682 |
Caterpillar Information System:
C7 On-highway Engine Air Inlet Elbow
C4.4 Industrial Engine Electronic Control Module
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
3500B and 3500C Locomotive Engines System Overview
C27 and C32 Tier 4 Final Marine Engines Temperature Sensor
2006/03/01 Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
C3.3 and C4.4 Generator Sets Engine - Install
C3.3 and C4.4 Generator Sets Engine - Remove
C7 On-highway Engine Air Inlet Elbow
G3500 Engines Performance Parameters
2006/04/10 Product Structure Residence Changes for Parts Information {7000, 7300}
C15 Industrial Engine Cruise Control Parameters
C4.4 Industrial Engine Crankshaft Pulley
C15 Industrial Engine Input Selections
C15 Industrial Engine Timer Parameters
2006/03/20 Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0781, 1900}
C4.4 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 and C4.4 Generator Sets Generator - Remove
C3.3 and C4.4 Generator Sets Generator - Install
G3500 A3 Engines Actuator Linkage - Air/Fuel Ratio Valve