Crankshaft Pulley
Show/hide table
Illustration 1 | g00915497 |
A standard pulley |
Note: Lubricate the threads of the bolts with clean engine oil before installation.
(1) Tighten the three bolts for the crankshaft pulley to the following torque. ...
Note: Recheck the torque of the bolts (1) once.
(2) Thrust block
(3) Crankshaft pulley
Crankshaft Pulley for the Poly V-Belt
Show/hide table
Illustration 2 | g01335910 |
Typical example (1) Bolt (2) Thrust block (3) Crankshaft adapter (4) Crankshaft pulley (5) Bolt |
(1) Tighten the three bolts for the thrust block to the following torque. ...
Note: Recheck the torque of the bolts (1) once.
(5) Tighten the three bolts for the crankshaft pulley to the following torque. ...
Caterpillar Information System:
C15 Industrial Engine Cruise Control Parameters
2006/04/10 Product Structure Residence Changes for Parts Information {7000, 7300}
G3500 Engines Performance Parameters
C7 On-highway Engine Air Inlet Elbow
C7 On-Highway Engine Valve Mechanism Cover - Remove and Install
C7 On-highway Engine Air Inlet Elbow
C4.4 Industrial Engine Electronic Control Module
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C15 Industrial Engine Input Selections
C15 Industrial Engine Timer Parameters
2006/03/20 Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0781, 1900}
C4.4 Industrial Engine Crankshaft - Steel Crankshaft
C3.3 and C4.4 Generator Sets Generator - Remove
C3.3 and C4.4 Generator Sets Generator - Install
G3500 A3 Engines Actuator Linkage - Air/Fuel Ratio Valve
C7 PETROLEUM Petroleum Engine Fuel Priming Pump - Remove and Install
G3508, G3512 and G3516 Engines Drive Housing (Front) - Remove and Install
C7 PETROLEUM Petroleum Engine Fuel Filter Base - Remove and Install
2006/04/10 New Oil Pan Groups Have Been Released {1302}
C11 and C13 Petroleum Engines Alternator and Regulator