Gear Pump (Transmission)
Show/hide table
Illustration 1 | g01684278 |
(1) Torque for eight bolts ...
(2) Lubricate the bore lightly with lubricant that is being sealed.
(3) Apply 9S-3263 Thread Lock Compound to the threads of the four studs.
(4) Apply 155-0695 Thread Lock Compound to the threads of the four studs.
Caterpillar Information System:
C7 and C9 Marine Engines CID 0004 FMI 11 Cylinder #4 Injector fault
C7 and C9 Marine Engines CID 0003 FMI 11 Cylinder #3 Injector fault
C7 and C9 Marine Engines CID 0002 FMI 11 Cylinder #2 Injector fault
C7 and C9 Marine Engines CID 0001 FMI 11 Cylinder #1 Injector fault
C3.3 Industrial Engine Lifter Group
C3.3 Industrial Engine Fuel Injectors
C3.3 Industrial Engine Engine Oil Pressure
C3.3 Industrial Engine Fuel Injection Lines - Remove
CX31 On-Highway Transmission Visual Inspection
Battery Charger Power Supply Circuit Fuse Is Too Small on 3456 and 3406 Common Design Generator Set Packages{1406, 1417} Battery Charger Power Supply Circuit Fuse Is Too Small on 3456 and 3406 Common Design Generator Set Packages{1406, 1417}
C7 Engines for Combat and Tactical Vehicles 0102-04 Boost Pressure voltage low (25)
C3.3 Industrial Engine Fuel Filter Base - Remove and Install
C3.3 Industrial Engine Cylinder Head Valves
C7 and C9 Marine Engines CID 0005 FMI 11 Cylinder #5 Injector fault
C3.3 Industrial Engine Fuel Injection Lines - Install
C7 and C9 Marine Engines CID 0006 FMI 11 Cylinder #6 Injector fault
C3.3 Industrial Engine Crankcase Breather
C3.3 Industrial Engine Fuel Injector Cover - Remove and Install - If Equipped
C3.3 Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
C3.3 Industrial Engine Water Temperature Regulator and Housing
C3.3 Industrial Engine Fuel Injection Pump - Install - Delphi DP210
C3.3 Industrial Engine Turbocharger - Remove
3126B and 3126E Truck Engines Camshaft
C3.3 Industrial Engine Turbocharger - Install