C7 and C9 Marine Engines Caterpillar

The Electronic Control Module (ECM) is attempting to operate the injector. The ECM detects an open or a short in the circuit for the injector.

If the cause of the diagnostic code is a problem in the common wire, two cylinders will be affected because of the shared common wire for the injectors.

System Response:

The ECM will log the diagnostic code. The ECM will continue to attempt to operate the injector after the code has been logged.

The injector may not operate while the condition exists.

Possible Performance Effect:

• The engine may misfire.

• The engine may experience low power.

Troubleshooting:

Test Step 1. Perform the following diagnostic procedure: "Injector Solenoid Circuit - Test"

Results:

• OK - STOP