Valve Mechanism Cover
Show/hide table
Illustration 1 | g00819350 |
(1) Tighten the bolts for the valve mechanism cover to the following torque. ...
(2) Tighten the bolts for the connector for the inlet manifold to the following torque. ...
(3) Connector for the inlet manifold
(4) Gasket
(5) Tighten the cap nuts for the valve mechanism cover to the following torque. ...
(6) Valve mechanism cover
(7) Housing for the rocker shaft assembly
(8) Seal
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C2.2 Engine and C1.5 Generator Set Engine Design
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C7.1 (Mech) Industrial Engine Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Water Connection Group
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Camshaft
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Block
C2.2 Engine and C1.5 Generator Set Crankshaft
C2.2 Engine and C1.5 Generator Set Connecting Rod Bearing Journal
C2.2 Engine and C1.5 Generator Set Main Bearing Journal