Engine Oil Relief Valve
Show/hide table
Illustration 1 | g00820218 |
Note: When the engine oil relief valve is installed, ensure that all components are clean. Lightly lubricate all components with clean engine oil.
(1) O-ring
A new O-ring should be used when the engine oil relief valve is installed.
(2) Tighten the engine oil relief valve to the following torque. ... 64 N·m (47 lb ft)
The engine oil pressure at the engine oil relief valve is the following value.
- C1.5 ... 262 to 359 kPa (38 to 52 psi)
- C2.2 ... 352 to 448 kPa (51 to 65 psi)
Note: Always remove the engine oil relief valve before removing or installing the crankshaft. Damage to the engine oil relief valve or damage to the crankshaft may occur.
Caterpillar Information System:
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Camshaft
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Block
C2.2 Engine and C1.5 Generator Set Crankshaft
C2.2 Engine and C1.5 Generator Set Connecting Rod Bearing Journal
C2.2 Engine and C1.5 Generator Set Main Bearing Journal
C2.2 Engine and C1.5 Generator Set Engine Design
C2.2 Engine and C1.5 Generator Set Connecting Rod
C9 Generator Set Self-Diagnostics - If Equipped with EMCP 3
C2.2 Engine and C1.5 Generator Set Piston and Rings
C2.2 Engine and C1.5 Generator Set General Information
C2.2 Engine and C1.5 Generator Set Gear Group (Front)