Fuel Injection Lines
Show/hide table
| |
| Illustration 1 | g00818680 |
(1) Tighten the union nuts for the fuel injector to the following torque. ...
(2) High pressure fuel supply line
(3) Low pressure fuel return line
(4) Tighten the banjo bolt to the following torque. ...
Show/hide table
| |
| Illustration 2 | g00818888 |
(5) Tighten the nut to the following torque. ...
(6) Washers for the fuel return line
(7) Washer for the fuel injector
(8) Washers for the banjo bolt
Note: All washers must be replaced when the fuel lines are removed.
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Engine Design
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C7.1 (Mech) Industrial Engine Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Water Connection Group
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines
C4.4 Marine Auxiliary Generator Set Engine Crankcase Breather
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
C4.4 (Mech) Marine Generator Set MCS-3 Water Lines - Engines with a Keel Cooler
C32 Petroleum Engines Model View Illustrations
C4.4 Marine Generator Set Engines Flywheel - Install
C4.4 Marine Generator Set Engines Flywheel - Remove
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Camshaft
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve