Illustration 1 | g00736528 |
(1) Maximum working pressure for the 148-5382 Actuator or the 154-8041 Actuator ... 20700 kPa (3000 psi)
(2) Tighten the 8T-4133 Nut to the following torque. ... 45 N·m (33 lb ft)
(3) Tighten the 0S-1585 Bolt to the following torque. ... 85 N·m (63 lb ft)
(4) Tighten the 0S-1589 Bolt to the following torque. ... 175 N·m (129 lb ft)
(5) Tighten the 8T-4244 Nut to the following torque. ... 40 N·m (30 lb ft)
(6) Tighten the 8T-8917 Bolt to the following torque. ... 85 N·m (63 lb ft)
(7) Tighten the 9B-7237 Bolt to the following torque. ... 38 N·m (28 lb ft)
(A) The movement of the piston rod should be less than 19 mm (0.750 inch).
Illustration 2 | g00735786 |
(1) Minimum brake lining friction material ... 5.8 mm (0.228 inch)
Note: The brake shoe lining must be asbestos free.
(2) 8R-0378
Total coils ... 17.5
Load at assembly ... 14 ± 1.4 kg (31 ± 3 lb)
Assembled length ... 100 mm (3.94 inch)
Initial tension ... 6.97 kg (15.4 lb)
(3) 8R-0377 Spring
Total coils ... 10.25
Load at assembly ... 22.7 ± 2.3 kg (50 ± 5 lb)
Assembled length ... 83 mm (3.27 inch)
Initial tension ... 6.1 kg (13.5 lb)
(4) Tighten the 1B-4207 Nut to the following torque. ... 198 ± 28 N·m (146 ± 21 lb ft)