Turbocharger
Show/hide table
Illustration 1 | g01039760 |
Typical example |
(1) Bolts that hold the turbocharger to the exhaust manifold
-
Put 5P-3931 Anti-Seize Compound on the bolt threads and the bearing surface before assembly.
- Torque ... 54 ± 5 N·m (40 ± 4 lb ft)
(2) Turbocharger clamps
- Tighten the turbocharger clamps.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
- Gently hit around the turbocharger clamps with a soft faced hammer.
- Again tighten the turbocharger clamps.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
Caterpillar Information System:
2004/03/01 One Control Harness Assembly and Two Adapter Cable Assemblies Are Available to Connect Personal Computers with Cat ET to ADEM III, ADEM IV:E1, and ADEM IV:E4 Electronic Control Modules {1408}
2003/12/01 An Improved Air Silencer is Used {1087}
2004/01/01 New Camshaft Idler Gear {1212, 1234}
3056E Industrial Engine Engine Oil Pressure - Test
2004/05/17 New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
EMCP3 Electronic Control Module (Generator Set) - Configure
G3500 Engines Pressure Sensor
C32 Marine Engine Cylinder Liner Projection - Inspect
C-10 Petroleum Engine Piston and Rings
C-10 Petroleum Engine Connecting Rod
C-10 Petroleum Engine Connecting Rod Bearing Journal
C-10 Petroleum Engine Cylinder Liner
2003/12/01 Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
C18 Industrial Engines Fuel Related Components in Cold Weather
2005/05/09 Improved Connecting Rod Bearing is Used {1218, 1219}
2003/12/01 New Kits are Available for Servicing the Fuel Transfer Pump {1256}
EMCP3 Event Resetting
EMCP3 Event Viewing
2003/12/01 VR3 Voltage Regulator Initial Adjustment {4467}
2003/12/01 An Improved Spark Plug is Available {1555}
C9 Marine Auxiliary and Marine Generator Set Engines CID 0269 FMI 04 Sensor Supply too low
3500 Marine Engines Turbocharger
C-18 Truck Engines Maintenance Interval Schedule
C32 Marine Engine Instrument Gauge